[TechAssist] Re: Best way to clean a head.
- From: gulftech@xxxxxxxx
- To: techassist@xxxxxxxxxxxxx
- Date: Sat, 24 Nov 2001 20:10:03 -0600
Good thoughts, Dennis.
I suppose I shouldn't have said "get used to the strong smell." If not
used in a well-ventilated area, who knows what that stuff could do.
Thanks for the clarification.
As for toothbrushes, I use them only for large areas (use acid brush for
small ones) and use them to reduce exposure to the fumes. Since the
t-brush remains useful for many months, I thought little about plastic
board contamination.
That is another reason this list is so great! We are never too old to
learn.
Thanks,
Ken Smith
Gulf Technical Services
3034 Gulf Breeze Parkway
Gulf Breeze, FL 32561
850-934-8324 (Voice) 850-932-0819 (Fax)
-----------------
On Sat, 24 Nov 2001 17:22:45 -0800 Dennis Viereck <wa6ati@xxxxxxxxxxxxxx>
writes:
> I Instruct my techs not to use toothbrushes with chemicals like MEK.
> Inexpensive acid brushes or wooden paint brushes work excellent in
> these type
> of chemicals because the brush or handle will not dissolve and
> contaminate
> the board with the plastic from toothbrushes.
>
> For the paint brushes I use up to 1 inch wide with the bristles cut
> to about
> 3/4 ~ 1 inch in length. These last for years. I loose them before
> they wear
> out.
> Watch out for MEK it is a outstanding solvent for flux but us it in a
> ventilated room. It is not a chemical you want to used to smelling.
>
> Dennis Viereck
>
> gulftech@xxxxxxxx wrote:
>
> > I use MEK to clean boards before and after a repair. It works
> really
> > great and MUCH cheaper than flux remover. (About $5.00 a quart at
> Ace
> > Hardware.) Just have to get used to the strong smell! I use a
> > toothbrush to apply--have to change out every few months. It
> works on
> > the plastic and gives me a bad taste when I brush my teeth. (Just
> > kidding...)
> >
> > I must respectfully disagree on using Q-Tips on video heads. IMO,
> it's
> > fine for the rest of the tape path, but not for the video heads.
> I use
> > denatured alcohol (also from Ace) for the tape path. MEK might be
> great,
> > especially for the pinch roller, but since my can of MEK is
> contaminated
> > from board cleanings, I won't even try it. Have used Acetone as a
> last
> > resort a few times, but am fearful of damage to the head core and
> > windings.
> >
> > Ken Smith
> > Gulf Technical Services
> > 3034 Gulf Breeze Parkway
> > Gulf Breeze, FL 32561
> > 850-934-8324 (Voice) 850-932-0819 (Fax)
> >
> > ----------------
> >
> > On Sat, 24 Nov 2001 14:17:32 -0800 "Richard Golden d.b.a. Golden
> Video
> > Repair Center" <reldong@xxxxxxxxx> writes:
> > >
> > > I've used mek (methyl ethyl ketone) and qtips for 15 yrs
> > > 3 shops over I,ooo 's of vcrs tried everything else first
> > > works best and I quart last a long time. buy from home depo etc.
> had
> > > a
> > > customer who was a chemist find it for me. Will EAT plastic!!!
> can
> > > use on
> > > all heads audio ,
> > > video tape guides pinch rollers pc boards but no soft
> > > Plastic!!cleans rubber
> > > ok
> > > Richard
> > >
> > > ---- Original Message -----
> > > From: "Tel-Tek Electronics" <teltek@xxxxxxxxxxx>
> > > To: <techassist@xxxxxxxxxxxxx>
> > > Sent: Friday, November 23, 2001 8:33 AM
> > > Subject: [TechAssist] Re: Best way to clean a head.
> > >
> > >
> > > >
> > > > Hey guys........
> > > > I use an Ultrasonic Denture Cleaner.
> > > > Use Isopropyl alcohol in the unit.
> > > > Unit has an airtight lid on it so the alcohol doesn't disperse
> > > between
> > > uses.
> > > > Works wonders on any parts that need cleaning.
> > > >
> > > > -Ed-
> > > >
> > > > teltek@xxxxxxxxxxx
> > > > TEL-TEK ELECTRONICS.
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "Leonard G. Caillouet" <lcaillo@xxxxxxxxxxxx>
> > > > To: <techassist@xxxxxxxxxxxxx>
> > > > Sent: Friday, November 23, 2001 11:03 AM
> > > > Subject: [TechAssist] Re: Best way to clean a head.
> > > >
> > > >
> > > > >
> > > > > I also use denatured alcolhol but use strips of synthetic
> > > chamois ( it
> > > > holds
> > > > > up better without giving up little bits and is smoother than
> > > natural).
> > > If
> > > > > you fold it into several layers it will hold enough solvent
> to
> > > get the
> > > > > dirtiest heads clean and allows you to put a good deal of
> > > pressure on
> > > the
> > > > > head drum. I run the head with a dummy cassette and rarely
> have
> > > a head
> > > > that
> > > > > doesn't clean on the first try. You can throw these
> synthetic
> > > chamois
> > > > into
> > > > > the washer several times before you replace them and the
> whole
> > > thing
> > > will
> > > > > last years.
> > > > >
> > > > > Leon.
> > > > >
> > > > > Leonard G. Caillouet
> > > > > Service Manager
> > > > > Electronics World
> > > > > Gainesville, FL
> > > > > 352-332-5608
> > > > > 352-332-5668 (fax)
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "Dennis Viereck" <wa6ati@xxxxxxxxxxxxxx>
> > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > Sent: Friday, November 23, 2001 12:20 AM
> > > > > Subject: [TechAssist] Re: Best way to clean a head.
> > > > >
> > > > >
> > > > > >
> > > > > > I just use plain white printer paper and denatured alcohol.
> > > cut the
> > > > paper
> > > > > in 1
> > > > > > inch wide strips 4 inches long. Soak one end of the paper
> in
> > > the
> > > alcohol
> > > > > and place
> > > > > > it against the video hear drum with my finger on the other
> > > side.
> > > Rotate
> > > > > the the
> > > > > > drum with a little pressure but no movement of my finger. I
> > > inspect
> > > the
> > > > > cleaning
> > > > > > with a machinist microscope and make sure the head is clean
> > > and no
> > > > debris
> > > > > left
> > > > > > over. I have used this method since the VBT200 days. Works
> > > great! As
> > > > long
> > > > > as you
> > > > > > dry it with a slight puff of compressed air before tossing
> a
> > > tape in
> > > the
> > > > > machine.
> > > > > >
> > > > > > Dennis Viereck
> > > > > >
> > > > > > Ralph Dorsey wrote:
> > > > > >
> > > > > > > a small piece of chamois cloth works great also (and it's
> > > re-usable)
> > > > > > >
> > > > > > > Ray Lufkin wrote:
> > > > > > >
> > > > > > > > Best way is to use a business card soaked in acetone.
> Hold
> > > it up
> > > > > against the
> > > > > > > > head and turn the head the standard direction (cc).
> That
> > > will
> > > > usually
> > > > > clean
> > > > > > > > the most stubborn clog.
> > > > > > > >
> > > > > > > > u
> > > > > > > > ----- Original Message -----
> > > > > > > > From: "Phillip R. Hull" <phil245@xxxxxxxxxxxxx>
> > > > > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > > > > Sent: Tuesday, November 20, 2001 4:44 PM
> > > > > > > > Subject: [TechAssist] Re: Question reguarding Panasonic
> > > VCRs
> > > > > > > >
> > > > > > > > >
> > > > > > > > > A worn head drum will show a full picture with a
> small
> > > area
> > > thats
> > > > > > > > distorted.
> > > > > > > > > Its caused because the tape no longer touches the
> head
> > > drum,
> > > the
> > > > > full
> > > > > > > > width
> > > > > > > > > of the tape. This is caused by a air gap between the
> > > tape and
> > > the
> > > > > head.
> > > > > > > > >
> > > > > > > > > Phillip R Hull
> > > > > > > > > phil245@xxxxxxxxxxxxx
> > > > > > > > > ----- Original Message -----
> > > > > > > > > From: "George Winters" <littletiger67@xxxxxxxxx>
> > > > > > > > > To: <techassist@xxxxxxxxxxxxx>
> > > > > > > > > Sent: Tuesday, November 20, 2001 3:59 PM
> > > > > > > > > Subject: [TechAssist] Re: Question reguarding
> Panasonic
> > > VCRs
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Howdy Wally,
> > > > > > > > > > If the heads are bad there won't be any video
> showing
> > > on the
> > > > > screen, if
> > > > > > > > > you have even and inch of video showing on the screen
> > > the heads
> > > > are
> > > > > good,
> > > > > > > > > clean them again. I've had some vcrs unit in my shop
> > > that would
> > > > have
> > > > > to be
> > > > > > > > > cleaned 6 times to clean the heads out. Hope this
> help
> > > you.
> > > > > > > > > > George Winters Jr.
> > > > > > > > > > GLW CUSTOM ELECTRONICS
> > > > > > > > > > TN.
> > > > > > > > > > Jeff Dougherty <jeff@xxxxxxxxxxxxxxxxxx> wrote:
> > > > > > > > > > Wally,
> > > > > > > > > > If these things have the spongy self
> cleaners..this is
> > > more
> > > than
> > > > > likely
> > > > > > > > > the
> > > > > > > > > > cause. What a sales gimmick!
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > Jeff
> > > > > > > > > > mailto:Jeff@xxxxxxxxxxxxxxxxxx
> www.9-11-2001tragedy.com
> > > > > > > > > > FAX 1-413-280-0677
> > > > > > > > > > Intrepid Video & Electronics
> > > > > > > > > > Harrisburg, PA 17111
> > > > > > > > > > 717-909-8844
> > > > > > > > > > www.intrepid-video.com www.tech-repair.net
> > > www.thetoolcaddy.com
> > > > > > > > > > ----- Original Message -----
> > > > > > > > > > From: "Wally Heise"
> > > > > > > > > > To:
> > > > > > > > > > Sent: Tuesday, November 20, 2001 1:39 AM
> > > > > > > > > > Subject: [TechAssist] Question reguarding Panasonic
> > > VCRs
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > I now have about 4 Panasonic vcrs which all have
> what
> > > appears
> > > > to
> > > > > be
> > > > > > > > bad
> > > > > > > > > > > video heads when you play. All of these vcrs are
> 1-4
> > > years
> > > old
> > > > > and
> > > > > > > > > > > different model numbers. I don't have a video
> head
> > > tester to
> > > > > check the
> > > > > > > > > > > heads yet, (have not had a big need for one). I
> am
> > > wondering
> > > > if
> > > > > others
> > > > > > > > > > > have seen a high failure rate with Panasonic
> video
> > > heads? Or
> > > > is
> > > > > there
> > > > > > > > > > > something else I'm missing? Is there an easy
> method
> > > of
> > > > > determining if
> > > > > > > > a
> > > > > > > > > > > video head is defective, without the tester?
> > > Needless to say
> > > I
> > > > > have
> > > > > > > > > > > cleaned and cleaned the heads to no avail.
> > > > > > > > > > >
> > > > > > > > > > > Any help is greatly appreciated.
> > > > > > > > > > >
> > > > > > > > > > > Thank you
> > > > > > > > > > > Wally Heise
> > > > > > > > > > > South Isle Repair
> > > > > > > > > > > =================================
> > > > > > > > > > > Help make your TechAssist database better!
> > > > > > > > > > > Submit your fixes here:
> > > > > http://circuitwork.com/techassist/tip/#tips
> > > > > > > > > > > =================================
> > > > > > > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > > > > > >
> techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > =================================
> > > > > > > > > > Help make your TechAssist database better!
> > > > > > > > > > Submit your fixes here:
> > > > > http://circuitwork.com/techassist/tip/#tips
> > > > > > > > > > =================================
> > > > > > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > > > > >
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > ---------------------------------
> > > > > > > > > > Do You Yahoo!?
> > > > > > > > > > Yahoo! GeoCities - quick and easy web site hosting,
> > > just
> > > > > $8.95/month.
> > > > > > > > > >
> > > > > > > > > > =================================
> > > > > > > > > > Help make your TechAssist database better!
> > > > > > > > > > Submit your fixes here:
> > > > > http://circuitwork.com/techassist/tip/#tips
> > > > > > > > > > =================================
> > > > > > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > > > > >
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > > =================================
> > > > > > > > > Help make your TechAssist database better!
> > > > > > > > > Submit your fixes here:
> > > > http://circuitwork.com/techassist/tip/#tips
> > > > > > > > > =================================
> > > > > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > > > >
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > > =================================
> > > > > > > > Help make your TechAssist database better!
> > > > > > > > Submit your fixes here:
> > > http://circuitwork.com/techassist/tip/#tips
> > > > > > > > =================================
> > > > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > > >
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > > >
> > > > > > > =================================
> > > > > > > Help make your TechAssist database better!
> > > > > > > Submit your fixes here:
> > > http://circuitwork.com/techassist/tip/#tips
> > > > > > > =================================
> > > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > >
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > > >
> > > > > > =================================
> > > > > > Help make your TechAssist database better!
> > > > > > Submit your fixes here:
> > > http://circuitwork.com/techassist/tip/#tips
> > > > > > =================================
> > > > > > To UNSUBSCRIBE your email address, click here:
> > > > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > >
> > > > >
> > > > > =================================
> > > > > Help make your TechAssist database better!
> > > > > Submit your fixes here:
> > > http://circuitwork.com/techassist/tip/#tips
> > > > > =================================
> > > > > To UNSUBSCRIBE your email address, click here:
> > > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > > > >
> > > >
> > > > =================================
> > > > Help make your TechAssist database better!
> > > > Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> > > > =================================
> > > > To UNSUBSCRIBE your email address, click here:
> > > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> > > ----------------------------------------------------
> > > Sign Up for NetZero Platinum Today
> > > Only $9.95 per month!
> > > http://my.netzero.net/s/signup?r=platinum&refcd=PT97
> > > =================================
> > > Help make your TechAssist database better!
> > > Submit your fixes here:
> http://circuitwork.com/techassist/tip/#tips
> > > =================================
> > > To UNSUBSCRIBE your email address, click here:
> > > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
> > >
> >
> > ________________________________________________________________
> > GET INTERNET ACCESS FROM JUNO!
> > Juno offers FREE or PREMIUM Internet access for less!
> > Join Juno today! For your FREE software, visit:
> > http://dl.www.juno.com/get/web/.
> > =================================
> > Help make your TechAssist database better!
> > Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> > =================================
> > To UNSUBSCRIBE your email address, click here:
> > mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
>
> =================================
> Help make your TechAssist database better!
> Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
> =================================
> To UNSUBSCRIBE your email address, click here:
> mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
>
________________________________________________________________
GET INTERNET ACCESS FROM JUNO!
Juno offers FREE or PREMIUM Internet access for less!
Join Juno today! For your FREE software, visit:
http://dl.www.juno.com/get/web/.
=================================
Help make your TechAssist database better!
Submit your fixes here: http://circuitwork.com/techassist/tip/#tips
=================================
To UNSUBSCRIBE your email address, click here:
mailto:techassist-request@xxxxxxxxxxxxx?subject=unsubscribe
Other related posts:
