Content-Type: Text/Plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Don;=0D On your computer problem...do you still have the old H/D in tact? Unless = the H/D was formated after tranferring files, the info should still be on you= r H/D. Just the actual program will no longer point to it. Database files usually would have to be purposely erased. If you have a CD burner, alway= s burn the actual files onto a CD-R. Can't give you any help on the Monitor= , since I don't so any, just my own.=0D =0D -Ed-=0D BTW...Friend or not...this guy might have told you that he did not know h= ow to tranfer your files properly, realizing the sensitivity of this data.=0D =0D -------Original Message-------=0D =0D From: techassist@xxxxxxxxxxxxx=0D Date: December 09, 2002 01:47:34 AM=0D To: J or CLINT=0D Subject: [TechAssist] Acer 78e-Mod#7178E-fcc#jvp7178ie Poor regulation??=0D =0D Greetings techs,=0D If I may take a moment of your time before I ask about the above subject Recently purchased a new PC for my shop,an XP1700 with MSI motherboard KT= 3 Ultra,256ddr,40gb,52X cd,48x16x48 cdrw,NVIDIA GE4/64MB &NETWORK card for = my VIBE,ADSL Modem,soundblaster 5.1.After receiveing it I went to my compute= r friend,who has his own business in this field,with both units.I wanted hi= m to transfer all my data files I had saved on consumer electronics,ie tv,v= cr stereo,microwave,etc & pc & monitors.Also my address's,contacts.Somehow a= ll of it was lost.He was most apoloagetic but I lost alot of valueable data.= So in future requests from me please be patience if my questions seem redund= ent Phil Bader,an excellant tech,who helped setup my data base for me,may be able to assist me.Not trying to put Phil on the spot but I know from past experience with him,he will do what he can to help.=0D As for the ''subject line'' this unit seems to have poor regulation.After= it s on for 20 min the picture shakes,then starts to shrink in on the sides = & eventually will shut itself down.If I freeze spray Q602=3D2SK1016,the mos= fet in the smps,the problem clears for a moment.There is also a small blue cap=3DC621,next to this mosfet,which the freeze may be affecting as well.= No # s on it.Am I on the right track with this & is there a sub for this fet & would like the value of this blue cap=3DC621.I have checked in partsminder/freetradezone & got the datasheet on the N chan. mosfet, but = was wondering if I could sub or should I go with an OEM.Thank-you all for you= r time & sorry for the long speel....regards........=0D Don of HARTS-TVCR-ASC=0D 9 Robert St,Oromocto,NB,Canada,E2V3N2=0D Tel-506-357-9785,Fax-506-357-6010=0D hartstv@xxxxxxxxxxx=0D =0D =0D =0D =0D ------------------------------------------=0D Submit A Repair Tip For Everyone Here:=0D http://www.tech-assist.org/secure/tip/main.html=0D ------------------------------------------=0D To REMOVE your email address, click here:=0D http://www.tech-assist.org/unsubb.html=0D To CHANGE your email address, click here:=0D http://www.techassist.net/forms/change.html=0D =0D =2E ------------------------------------------ Submit A Repair Tip For Everyone Here: http://www.tech-assist.org/secure/tip/main.html ------------------------------------------ To REMOVE your email address, click here: http://www.tech-assist.org/unsubb.html To CHANGE your email address, click here: http://www.techassist.net/forms/change.html