Look for a module soldered to the main board, think it is called a YC separator, is has lots of surface mount caps inside, change them all for convenience since it is hard to service the module in the set. Robert Cardoza Picture Perfect Elec. 9940 NW 6th Ct Pembroke Pines, Fla, 33024 954-435-5868 In a message dated 6/16/2005 4:24:48 PM Eastern Daylight Time, peggs@xxxxxxxxxxxxx writes: This unit has some type of video 'interference' problem. Both on tuner and the AV inputs.It's hard to describe. Similar to a slight AGC overload problem. I've replaced numerous 'leaky' caps on this AV/Video/Chroma board. They are on other boards in here as well.Most of these bad caps are Blue,100uF @ 16v. Heat and chill doesn't help isolate the culprit(s). Any tips on an old hitachi model CU4601K ??? Hitachi website didn't offer much help...... Peggs Peggs' Electronics 1519 West 2nd Street Owensboro,KY 42301 270-926-4968 fax 270-686-7399 peggs@xxxxxxxxxxxxx ----------------------------------------------------------------------------- This Email List is Public. Remove: http://www.tech-assist.org/remove.htm Lost Password: http://www.tech-assist.org and select "Login Problems?". Appliance Repair List: http://www.tech-assist.org/secure/tip/chatjoin.htm#app Email Archives: //www.freelists.org/archives/techassist/