Dear fellow MOVA users I've got a poser for you! I'm trying to work out how to code the detector data for the following situation: Single lane approach to signals widens to two lanes just 28 metres from the stopline. There is one lane for aheads and one lane for right turners only. Vehicles wishing to turn left have to use a free left slip lane just 10 metres from the stop line. I have placed an IN loop at 101 metres, an X loop at 39 metres (before the single lane widens to 2 lanes) and an X-sink loop on the left slip. Originally I had an X loop on the short right turn lane to act as an X-sink for the ahead lane, but cannot see how to accommodate the two X-sinks for the ahead lane. Can I put a X loop at 25 metres from the stopline on the ahead lane to act as the X-sink for the right turn lane, and use the left slip as a X-sink for the ahead lane? The flows are fairly well balanced for all three manoeuvres and none are insignificant. Many thanks Shirley Reynolds Warwickshire County Council (01926) 412733 PS When is Tony Sharp coming back from his holiday! ----------------------------------------------------------- A message from the TCUG mailing list. For information about the list visit //www.freelists.org/webpage/tcug