All the MACH delay does is not let the drogue/apogee channel fire till after the delay, every thing else stays the same. From how I read the manual if it reaches apogee before the delay is over it will not fire the apogee charge EVER. So make sure the delay is well less than the expected apogee. A 4 second delay should have been fine for this flight, could have been a bit longer as apogee should have been at 10+ seconds. rz _____ From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of gary-walker@xxxxxxxxxxx Sent: Sunday, May 20, 2012 9:40 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Drag Race Maybe you all can help me with this cause I'm in new territory with this "kick ass" flight. I used a Hi-Alt 45 altimeter (not high end I'll grant) and set mach delay to 4 second (just in case). My understanding is that the altiude baro delays sampling for 4 seconds, right? My sim estimates an altitude of about 2k at 4 seconds. My altimeter read out 4968. Does that mean my approx altitude was 6900? That coincides with all my sims...or did I lay an egg and only go 4968? Otherwise, all I know is, it recovered successfully :-) GW _____ From: "James Dougherty" <jafrado@xxxxxxxxx> To: tccrockets@xxxxxxxxxxxxx Cc: "Lee Scott" <leescott91006@xxxxxxx>, "Richard Dierking" <richard.dierking@xxxxxxxxx> Sent: Sunday, May 20, 2012 9:24:41 PM Subject: [tccrockets] Re: Nike Drag Race Jimmy, Gary, Richard, did you guys get flight stats? On Sun, May 20, 2012 at 9:20 PM, James Dougherty <jafrado@xxxxxxxxx> wrote: Yes, definitely. Congratulations Jimmy, nice flying! BTW, we should fly again at OS. What do you all say? On Sun, May 20, 2012 at 8:28 PM, <gary-walker@xxxxxxxxxxx> wrote: I'm really stunned at how evenly they all launched. It's a testament to the great launch system providing the amperage to get them off together and the even competition. In my book we all won...That said from a flyer tied for maybe 5th through 8th. Congrats Jimmy!! You "SMOKED" EVERYONE!!!! _____ From: "Jack Garibaldi" <jackgaribaldi@xxxxxxx> To: tccrockets@xxxxxxxxxxxxx Sent: Sunday, May 20, 2012 8:17:06 PM Subject: [tccrockets] Re: Nike Drag Race Looks like James and me were fighting for last place Jack G From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Ron Swenson Sent: Sunday, May 20, 2012 7:49 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Drag Race Great picture! Thank you! From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] <mailto:%5bmailto:tccrockets-bounce@xxxxxxxxxxxxx%5d> On Behalf Of Steve Jurvetson Sent: Sunday, May 20, 2012 7:08 PM To: TCC Subject: [tccrockets] Re: Nike Drag Race Looks like the far left Nike Smoke was first off the pad: http://www.flickr.com/photos/jurvetson/7238291674 Incredibly close grouping off the pad. Thanks TCC for a great weekend. I have video from eight cameras to edit through, so it might take a bit. And if you launched from the away pad, I might have some launch photos for you. Steve --------------------------------------------------------- Steve Jurvetson Draper Fisher Jurvetson Phone: 650-233-9000 Work: http://www.DFJ.com/steve Photoblog: http://www.DFJ.com/J Google Tech Talk: http://www.DFJ.com/GTT --------------------------------------------------------- From: Ron Swenson <swensonron@xxxxxxxxxxx> Reply-To: TCC <tccrockets@xxxxxxxxxxxxx> Date: Wed, 2 May 2012 16:58:23 -0700 To: TCC <tccrockets@xxxxxxxxxxxxx> Subject: [tccrockets] Re: Nike Drag Race LOL! From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of AiRobert Sent: Wednesday, May 02, 2012 2:13 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Drag Race Sounds like a lot of work-just to be in last place!! ;) _____ From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jimmy Franco Sent: Wednesday, May 02, 2012 11:45 AM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Drag Race OK I have my kit built, all left to do is T/T and paint. Then she will be ready to kick some ass. Did a custom airfoil effect on the 1/4" thick ply. fins, it looks sweet. Fins are 7/16" thick at the root and ~5/16" at the tip. Then the airfoil tapers to the leading and trailing edge down to ~3/16". Fins will be composite of 1/4" birch ply, 3/32" basswood, west, and 1.5 fiberglass. Jimmy F. TRA 12524 From: Ron Swenson <mailto:swensonron@xxxxxxxxxxx> Sent: Sunday, April 29, 2012 8:10 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Drag Race Very nice! From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of James Dougherty Sent: Saturday, April 28, 2012 7:38 PM To: tccrockets@xxxxxxxxxxxxx Subject: [tccrockets] Re: Nike Drag Race Updated the logo K2045 fliers made the first line On Wed, Apr 25, 2012 at 1:18 AM, James Dougherty <jafrado@xxxxxxxxx> wrote: Sounds like we're gonna have a lot of fun guys, looking forward to it! Sent from my iPhone On Apr 24, 2012, at 9:02 PM, Ben Sandoval <yobenflstf@xxxxxxxxxxxxx> wrote: I'm in, not sure which dance I'll be doing LMAO. --- On Mon, 4/23/12, Ron Swenson <swensonron@xxxxxxxxxxx> wrote: From: Ron Swenson <swensonron@xxxxxxxxxxx> Subject: [tccrockets] Re: Nike Drag Race To: tccrockets@xxxxxxxxxxxxx Date: Monday, April 23, 2012, 6:19 PM I'll take one of those K2045's. I'm already planning my victory dance! From: tccrockets-bounce@xxxxxxxxxxxxx [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi Sent: Monday, April 23, 2012 5:16 PM To: TCC -Chat Subject: [tccrockets] Nike Drag Race Hi All Ok James woke up the Nike crowd and I have been getting e-mails and phone calls on what we are doing so here it is. Nike Drag race on any size Nike Smoke you want but it has to have a K motor in it or larger if you decide to fly a larger Nike. Repeat- Has to be a Nike Smoke now the motor of choice was the K2045 I will have about 14 or 15 of them and if you are in the drag race with a K2045 I will do the motor for $99.00 only the K2045 so if you have a Nike and want to fly another motor you can but I am not sure why you would want to get your assed kicked with something less. I also have Nike's in stock in all sizes 4", 5.5", 7.5" and 10" in the Polecat brand and I have a few of the Madcow 4" glass Nikes which are basically the Performance Nike's. I saw a post where Aaron wanted to fly the K1103X well as long as it is in a Nike then fine but the problem Aaron is we did this motor as a demo last year and Steve Sawyer got whipped with that motor and I talked to Aerotech and they are still not California certified a year later, so Karl is going to let me know when it can go into California. So any questions? Jack G No virus found in this incoming message. Checked by AVG - www.avg.com <http://www.avg.com/> Version: 8.5.455 / Virus Database: 271.1.1/4972 - Release Date: 05/01/12 18:36:00 No virus found in this incoming message. Checked by AVG - www.avg.com Version: 8.5.455 / Virus Database: 271.1.1/5010 - Release Date: 05/19/12 18:34:00