[tccrockets] Re: Nike Drag Race
- From: "Matt Powell" <mattp@xxxxxxxxxxxx>
- To: <tccrockets@xxxxxxxxxxxxx>
- Date: Tue, 24 Apr 2012 10:55:07 -0700
So,
Is there space for a level 1 to race. Or just for the big boys. Kenny
found the 2.5 glass Nike Madcow 38mm . Jack do you have any Nike stock for
38mm.
Matt
From: tccrockets-bounce@xxxxxxxxxxxxx
[mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi
Sent: Monday, April 23, 2012 5:16 PM
To: TCC -Chat
Subject: [tccrockets] Nike Drag Race
Hi All
Ok James woke up the Nike crowd and I have been getting
e-mails and phone calls on what we are doing so here it is.
Nike Drag race on any size Nike Smoke you want but it has to have a K motor
in it or larger if you decide to fly a larger Nike. Repeat- Has to be a
Nike Smoke now the motor of choice was the K2045 I will have about 14 or 15
of them and if you are in the drag race with a K2045 I will do the motor for
$99.00 only the K2045 so if you have a Nike and want to fly another motor
you can but I am not sure why you would want to get your assed kicked with
something less. I also have Nike's in stock in all sizes 4", 5.5", 7.5" and
10" in the Polecat brand and I have a few of the Madcow 4" glass Nikes which
are basically the Performance Nike's. I saw a post where Aaron wanted to fly
the K1103X well as long as it is in a Nike then fine but the problem Aaron
is we did this motor as a demo last year and Steve Sawyer got whipped with
that motor and I talked to Aerotech and they are still not California
certified a year later, so Karl is going to let me know when it can go into
California. So any questions?
Jack G
Other related posts:
