Sounds like we're gonna have a lot of fun guys, looking forward to it! Sent from my iPhone On Apr 24, 2012, at 9:02 PM, Ben Sandoval <yobenflstf@xxxxxxxxxxxxx> wrote: > I'm in, not sure which dance I'll be doing LMAO. > > --- On Mon, 4/23/12, Ron Swenson <swensonron@xxxxxxxxxxx> wrote: > > From: Ron Swenson <swensonron@xxxxxxxxxxx> > Subject: [tccrockets] Re: Nike Drag Race > To: tccrockets@xxxxxxxxxxxxx > Date: Monday, April 23, 2012, 6:19 PM > > I’ll take one of those K2045’s. I’m already planning my victory dance! > > > > From: tccrockets-bounce@xxxxxxxxxxxxx > [mailto:tccrockets-bounce@xxxxxxxxxxxxx] On Behalf Of Jack Garibaldi > Sent: Monday, April 23, 2012 5:16 PM > To: TCC -Chat > Subject: [tccrockets] Nike Drag Race > > > > Hi All > > > > Ok James woke up the Nike crowd and I have been getting > e-mails and phone calls on what we are doing so here it is. > > > > Nike Drag race on any size Nike Smoke you want but it has to have a K motor > in it or larger if you decide to fly a larger Nike. Repeat- Has to be a Nike > Smoke now the motor of choice was the K2045 I will have about 14 or 15 of > them and if you are in the drag race with a K2045 I will do the motor for > $99.00 only the K2045 so if you have a Nike and want to fly another motor you > can but I am not sure why you would want to get your assed kicked with > something less. I also have Nike’s in stock in all sizes 4”, 5.5”, 7.5” and > 10” in the Polecat brand and I have a few of the Madcow 4” glass Nikes which > are basically the Performance Nike’s. I saw a post where Aaron wanted to fly > the K1103X well as long as it is in a Nike then fine but the problem Aaron > is we did this motor as a demo last year and Steve Sawyer got whipped with > that motor and I talked to Aerotech and they are still not California > certified a year later, so Karl is going to let me know when it can go into > California. So any questions? > > > > Jack G