[tccrockets] Re: Good idea wanted
- From: James Dougherty <jafrado@xxxxxxxxx>
- To: "tccrockets@xxxxxxxxxxxxx" <tccrockets@xxxxxxxxxxxxx>
- Date: Fri, 19 Apr 2013 00:16:05 -0700
That totally works
Sent from my iPhone
On Apr 18, 2013, at 4:30 PM, chvy91bowtie@xxxxxxx wrote:
> We can weld a steel ring around the pole a few inches down and then make a
> tool that will go over the pole down to the ring and allow you to hammer
> (piece of steel pipe with a plate welded on the end).
>
>
>
> -----Original Message-----
> From: AiRobert <airobert@xxxxxxxxxxxxx>
> To: tccrockets <tccrockets@xxxxxxxxxxxxx>
> Sent: Thu, Apr 18, 2013 4:14 pm
> Subject: [tccrockets] Good idea wanted
>
> We rebuilt the PA speakers at spring cleaning and now have a slight problem
> with them. When we pound the speaker poles into the ground it mushrooms the
> end a bit and then the speaker mount doesn’t slide onto the pole.
> Anybody got a good idea on how to best solve this?
> The pole is standard ¾ inch metal conduit and the mount is a standard
> threaded conduit end.
> My best idea so far is to mount a 6 inch long ½ inch diameter rod on the
> speaker that will slide INTO the pole.
>
> RZ
>
> <image002.jpg>
>
Other related posts:
