Are you trying to build what Mark has? -----Original Message----- From: Eric Woodall <eric@xxxxxxxxxxxxxx> To: tcb@xxxxxxxxxxxxx Sent: Thu, Jan 14, 2010 2:37 pm Subject: [tcb] Re: removable bell housing? Yeah, that kind of works, but I want the back side that I can bolt to a tand. olt the bell housing up to the run stand, then the engine to the bell ousing. eil wrote: What Will said...you don't need the whole housing...just the top part, where he starter connects and maybe down to the next bolt hole... --- On Thu, 1/14/10, Will <evil.scientist.boo@xxxxxxxxx> wrote: > From: Will <evil.scientist.boo@xxxxxxxxx> > Subject: [tcb] Re: removable bell housing? > To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx> > Date: Thursday, January 14, 2010, 10:55 AM > Cut up an 001 bug trans > > > > > -- Sent from my > Palm Pre > Eric Woodall wrote: > > I only want this for a run stand so I don't care about > strength. > > It'll be between an 002 and an 091, whichever I can > find for cheaper. > > Thanks Will. > > > > Will wrote: > > >> Don't recall. 091 is the strongest so that's >> > why they're popular > > >> -- Sent from my Palm Pre >> > ------------------------------------------------------------------------ > > >> Eric Woodall wrote: >> >> Looks like an 002 also has a removable bell housing. >> >> Will wrote: >> >>> 091 74 or 75 with the 5 rib >>> >>> -- Sent from my Palm Pre >>> > ------------------------------------------------------------------------ > > >>> Eric Woodall wrote: >>> >>> Can anyone tell me which year bus transaxle has >>> > the removable bell > > >>> housing? >>> >>> 74-78? >>> > > > > > >