Yeah, that kind of works, but I want the back side that I can bolt to a stand. Bolt the bell housing up to the run stand, then the engine to the bell housing. Neil wrote: > What Will said...you don't need the whole housing...just the top part, where > the starter connects and maybe down to the next bolt hole... > > --- On Thu, 1/14/10, Will <evil.scientist.boo@xxxxxxxxx> wrote: > > >> From: Will <evil.scientist.boo@xxxxxxxxx> >> Subject: [tcb] Re: removable bell housing? >> To: "tcb@xxxxxxxxxxxxx" <tcb@xxxxxxxxxxxxx> >> Date: Thursday, January 14, 2010, 10:55 AM >> Cut up an 001 bug trans >> >> >> >> >> -- Sent from my >> Palm Pre >> Eric Woodall wrote: >> >> I only want this for a run stand so I don't care about >> strength. >> >> It'll be between an 002 and an 091, whichever I can >> find for cheaper. >> >> Thanks Will. >> >> >> >> Will wrote: >> >> >>> Don't recall. 091 is the strongest so that's >>> >> why they're popular >> >> >>> -- Sent from my Palm Pre >>> >> ------------------------------------------------------------------------ >> >> >>> Eric Woodall wrote: >>> >>> Looks like an 002 also has a removable bell housing. >>> >>> Will wrote: >>> >>>> 091 74 or 75 with the 5 rib >>>> >>>> -- Sent from my Palm Pre >>>> >> ------------------------------------------------------------------------ >> >> >>>> Eric Woodall wrote: >>>> >>>> Can anyone tell me which year bus transaxle has >>>> >> the removable bell >> >> >>>> housing? >>>> >>>> 74-78? >>>> >> >> >> >> >> >> > > > > > >