[studiorecorder] Re: Navigating a file
- From: "Neal Ewers" <neal.ewers@xxxxxxxxxxxxxx>
- To: <studiorecorder@xxxxxxxxxxxxx>
- Date: Thu, 25 Jan 2007 09:14:08 -0600
Jonathan, it is not all that hard to do with the Go to Time command. If
you press the Equal key, SR will allow you to put in a time. Because SR
remembers that time until you change it, all you now have to do is to
press the Equals and then hit return and you are taken to the next
similar time increment. I know, it's two keystrokes instead of one, and
perhaps there is an easier way, but this works also.
Neal
-----Original Message-----
From: studiorecorder-bounce@xxxxxxxxxxxxx
[mailto:studiorecorder-bounce@xxxxxxxxxxxxx] On Behalf Of Milam,
Jonathan E.
Sent: Thursday, January 25, 2007 7:39 AM
To: studiorecorder@xxxxxxxxxxxxx
Subject: [studiorecorder] Navigating a file
Hi Rob,
If my file is 7 hours long, I would like to navigate through it by hour.
In other words, when I press the control+pagedown or control+page-up, I
would like for Studio to navigate one hour backwards or ahead depending
on the keystroke. I tried to set the navigation setting to 1 hour, but
it wouldn't allow me to do this. I could use the "goto time" command,
however, I have to enter an hour every time. How can I navigate the
file in hour incruments with a keystroke?
Jonathan
Other related posts:
