hi. yes. exactly i'd like to put quarter tone sign in key signiture. but it's not possible as i tried. there is a way to remove the plug-in you add to play quarter tone. when you do so, if you go to those notes wich has been affected, you hear a something about tecnic like this: "tecnic 0b80" or "0b64". if you press shift+tab and go to these tecniks that are not visible and delete them, they will be removed. Saeed On 11/13/11, Ramy Moustafa <nagham.lovers@xxxxxxxxx> wrote: > Hi: > > Just select the f12 in the Sibelius, and you will find quarter sharp and > quarter flat. > After that, select the place that contains the quarter tones, > Then open, the blug ins, and play back, then quarter tones, > Hit ok, and it's done, > But take care that it's a distructive editing, which mean s that you can't > get your notes back if you don't like the results. > So, always make a save before proceeding. > HTH > > If you wish to unsubscribe, send a blank message > with the single word, unsubscribe - in the Subject line to: > sib-access-request@xxxxxxxxxxxxx > If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx