Ramy, let me answer your second question first. to copy four bars to a point later in the score, simply go to the first beat in the first bar to be copied. Make sure to select all the staves you want to copy. Assuming you are using Sibelius 5.25, and assuming that you are starting from the top most staff in a system, you would select additional staves by pressing shift down arrow. You would copy additional bars by pressing control, shift right arrow. Once you've selected all four bars, press CTRL C to copy selection to clipboard. Now move to beat one of the top staff of the destination system and press CTRL V to paste the four measures where you want them. I'll have to do a little more research to remember how to do first and second endings. Kevin > Hi all: > Really I don't use 1st and 2nd endings so much so now I forgot how to use > them, > And also, the dacapo > When I was using the Sibelius 3 with Sibelius speaking, the documents can > remind me, but now please > I have a situation that I need your help > I have 4 bars, and I need to repeat the 1st 3 bars then I will change the > 4th one, how can I achieve this in Sibelius 5 with sib-access? > And, if I need to repeat a music part, for instance, > I have 4 bars then another 10 bars, then I need to repeat the 1st 4 bars. > How can I achieve this also? > > Any help wil be highly abbreciated > And please please, I need this as quickly as you can > Thanks > > Cheers: > Ramy Moustafa If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx