[SI-LIST] Re: modelling of wire as w-element transmission line

Hello Ray,
          In reply to your mail I wanted if you have any prefered software for 
solving RLGC values. In your reply to odd-mode impedance you mentioned about 
Apsim RLGC is it a stand alone field solver? Please tell me if you know about 
any good stand alone solver, how to get it and where to get it.

Thank you.
Jayanta
>Delivered-To: si-list@xxxxxxxxxxxxx
>Date: Tue, 25 Jun 2002 10:38:36 -0700 (PDT)
>From: Ray Anderson <Raymond.Anderson@xxxxxxx>
>Subject: [SI-LIST] Re: modelling of wire as w-element transmission line
>To: si-list@xxxxxxxxxxxxx
>MIME-Version: 1.0
>Content-MD5: lFSCs1COX+T9vjD5OHxh+A==
>Content-Transfer-Encoding: 8bit
>X-archive-position: 3201
>X-ecartis-version: Ecartis v1.0.0
>X-original-sender: Raymond.Anderson@xxxxxxx
>X-list: si-list
>X-Keywords: 
>
>
>
>>by having its width eqaul to the size of the actual length of the shorter 
>>conductor in strip SHAPE statement and length equal to actual width. But the 
>>spice file keeps running in an infinite loop.
>>
>>The spice file is attached.
>>
>>If any one has any clue to this please help me.
>>Thank you.
>>Jayanta Choudhury
>
>Without addressing any of your questions, I just tried running your
>Hspice deck to see what transpired. The simulation crashed within
>20 seconds of invoking it with this error message:
>
>-----------------------------------------------------------
>   Run-time exception error; current exception: xalloc
>            No handler for exception.
>   Abort
>------------------------------------------------------------
>
>
>(This was with Hspice v2001.2 running on a solaris platform)
>
>
>The .st0 status file looks like this:
>
>Init: hspice initialization file: /import/cadist/pkgs/hspice/hspice,v2001.2.sun
>init: begin read circuit files,  cpu clock=  2.98E-01
>      option scale    =    1.000E-07
>init: end read circuit files,  cpu clock=  3.22E-01 memory=     14 kb
>init: begin check errors,  cpu clock=  3.22E-01
>
>
>Did your simulation get any further ?
>
>I tend to not use the built-in field solver to generate RLGC
>parameters as I've got more faith in some of the stand-alone solvers
>that we have available.
>
>-Ray Anderson
>
>------------------------------------------------------------------
>To unsubscribe from si-list:
>si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
>
>or to administer your membership from a web page, go to:
>http://www.freelists.org/webpage/si-list
>
>For help:
>si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
>
>List archives are viewable at:     
>               http://www.freelists.org/archives/si-list
>or at our remote archives:
>               http://groups.yahoo.com/group/si-list/messages 
>Old (prior to June 6, 2001) list archives are viewable at:
>               http://www.qsl.net/wb6tpu
>  
>

------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu

Other related posts: