[SI-LIST] Re: The precision of Ansoft Maxwell 2D
- From: Ray Anderson <reanderson@xxxxxxxxxxxxx>
- To: zhang_kun@xxxxxxxxxx, si-list@xxxxxxxxxxxxx
- Date: Thu, 22 Jul 2004 19:09:00 -0700
Zhangkun-
Are you certain your transformer is as "transparent" as you are
assuming? What sort of bandwidth are you attempting to get measurement
vs simulation correlation over ? What kind of transformer are you using
as a balun in your measurements?
-Ray
zhangkun 29902 wrote:
>Scott
>
>I agree with you that it is very difficult to measure this kind of structure.
>In our measurement, I have changed the method several times. Do you know if
>there is some document describe this kind of method?
>
>In order to avoid common mode noise because of balance and unbalance
>connection, I have used transformer.
>
>Best Regards
>
>Zhangkun
>2004.7.23
>
>
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List FAQ wiki page is located at:
http://si-list.org/wiki/wiki.pl?Si-List_FAQ
List technical documents are available at:
http://www.si-list.org
List archives are viewable at:
//www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
