For those who may not be aware, a tool called StatEye has been developed by the the OIF (Optical Internetworking Forum) PhyLayer working group and is available as open source code. StatEye uses statistical methods to derive an eye diagram and jitter metrics for a channel characterized by s-parameters. StatEye runs under Matlab 6.5.1 StatEye is a leading standards development tool, used widely by a standards groups working with high speed interfaces. From their web site: "StatEye is a non-profit open source forum for the development and validation of physical interface channels and the signalling technology. Our mission is to proliferate the use of a standard method for the analysis of interface channels, that can be used by system and chip developer alike." The StatEye web site: http://www.stateye.org/ hosts the downloadble code, documentation, papers and presentations and a forum dedicated to StatEye topics. -Ray Anderson Sun Microsystems Inc. ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List FAQ wiki page is located at: http://si-list.org/wiki/wiki.pl?Si-List_FAQ List technical documents are available at: http://www.si-list.org List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu