[SI-LIST] Re: Series termination value

Also consider the effect of load(s) on the transmission line:  If there =
are a number of loads, maybe even if there's just one load, the =
effective (or loaded) characteristic impedance of the line is smaller =
than your 71 ohms ... the unloaded impedance.

This is especially true if the spacing between loads is relatively =
uniform, and if they are closer together (or closer to the source) than =
the length of a risetime of the signal.


------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field

or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list

For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field

List archives are viewable at:     
                http://www.freelists.org/archives/si-list
or at our remote archives:
                http://groups.yahoo.com/group/si-list/messages 
Old (prior to June 6, 2001) list archives are viewable at:
                http://www.qsl.net/wb6tpu
  

Other related posts: