[SI-LIST] Re: Power Plane Noise Injection
- From: Iliya Zamek <i_zamek@xxxxxxxxx>
- To: Vijay Chachra <vijaychachra@xxxxxxxxxxx>
- Date: Fri, 2 Sep 2011 22:17:51 -0700 (PDT)
Hello Vijay,
Generation noise for the PDN with nm-chip itself is very effective.
You can generate stationary Power noise using clock, or 1-0-1-0 pattern, as
Mark described. At some Aggressor and Victim frequencies' combinations
the aggressor impact will be worst and at some frequencies' combinations
aggressor impact on the victim will be minimum. You may found the theory
and examples of experiements in
http://www.altera.com/literature/cp/cp-01042-modeling-fpga-current-waveform-and-spectrum-and-pdn-noise-estimation.pdf for
the PDN noise analysis, and for the aggressor impacting the Victim Jitter in
http://ieeexplore.ieee.org/stamp/stamp.jsp?arnumber603875, and
http://www.altera.com/literature/cp/cp-01048-jitter-resonance.pdf
Nonstationary aggressor case you can create with PRBS, or "burst" pattern. Some
methods and examples of the modeling you can find there:
http://www.designcon.com/2010/DCPDFs/10-TH2_Iliya_Zamek.pdf
Thank you.
Best regards,
Iliya Zamek
From: Mark Alexander <mark.alexander@xxxxxxxxxx>
To: steve weir <weirsi@xxxxxxxxxx>; Vijay Chachra <vijaychachra@xxxxxxxxxxx>
Cc: si-list@xxxxxxxxxxxxx
Sent: Friday, September 2, 2011 11:29 AM
Subject: [SI-LIST] Re: Power Plane Noise Injection
Vijay,
In characterizing the power networks of Xilinx FPGAs we most often use
the DUT as the noise generator. We have had limited success with using
a second "noise generation" FPGA to generate and transmit noise to a
separate DUT victim FPGA, but this requires building a complex and
specialized board. Small isolated power networks (transceivers, PLLs,
etc.) have a high enough impedance that it's possible to drive noise
into them with a broadband power amplifier, but this doesn't work for
large core power systems.
When using the DUT as the noise generator (our primary approach), the
simplest thing to do is build a giant shift register out of most of the
device's flops, and shift a 1-0-1-0 pattern through it. Shifting PRBS
patterns with various toggle densities approximates the activity of
various datapaths and data types. By sweeping the clock frequency and
working with the size of the shift-register, most potential designs can
be approximated. Similar noise generators are built out of all major
resources: DSP blocks, BlockRAM and other functional blocks, to
characterize their noise generation potential.
Whether the intention is to characterize PDN noise or the performance
impact of such noise (clock jitter, etc.) dictates the choice of probe
type and capture method. Careful experiment design and hygiene is
obviously important (plenty of null tests, use of symmetry, attention to
metrics).
This kind of testing provides no end of useful and interesting
information, though it takes a surprising amount of time, effort, debug
and refinement.
Regards,
mark
-----Original Message-----
From: si-list-bounce@xxxxxxxxxxxxx [mailto:si-list-bounce@xxxxxxxxxxxxx]
On Behalf Of steve weir
Sent: Thursday, September 01, 2011 10:08 PM
To: Vijay Chachra
Cc: si-list@xxxxxxxxxxxxx
Subject: [SI-LIST] Re: Power Plane Noise Injection
Vijay, I am sorry I don't know of any publications on this subject. I
only know what I have done in my own work.
Steve
On 9/1/2011 8:32 PM, Vijay Chachra wrote:
> Steve,
> As a follow-up question...Is there a reference available which I can
> refer to for understanding how programmable device can help in noise
> injection on power plane?
> Will a simple LFSR type design work as "good enough" noise injector or
> Are there other tried and tested designs available?
> Thanks
> Vijay
>
>
> --- On *Fri, 9/2/11, steve weir /<weirsi@xxxxxxxxxx>/* wrote:
>
>
> From: steve weir <weirsi@xxxxxxxxxx>
> Subject: [SI-LIST] Re: Power Plane Noise Injection
> To: si-list@xxxxxxxxxxxxx
> Date: Friday, September 2, 2011, 6:17 AM
>
> Jason, the issues at HF is coming up with enough raw power, and
> then a
> low enough impedance connection to the PDN. It is much easier to
> characterize devices on a purpose-built test PCB. A large
> CPLD/FPGA on
> the test PCB makes a good programmable noise generator.
>
> Steve.
> On 9/1/2011 2:21 PM, jason.pritchard@xxxxxxx
>
<http://us.mc1373.mail.yahoo.com/mc/compose?to=jason.pritchard@xxxxxxx>
> wrote:
> > Hi All,
> >
> > I have an application that I want to create noise on a power
> rail and determine the effects of that noise on a device.
> >
> > 1) What methods have people used to do this type of testing?
> > 2) If you use an RF transformer can you recommend a specific
> type/model that works effectively with the lower impedance of the
> power planes as a load?
> >
> > I would like to simulate DC-DC switching noise as well as high
> frequency noise.
> >
> > Any suggestions will be helpful.
> >
> > Thank-you,
> > Jason
> >
------------------------------------------------------------------
> > To unsubscribe from si-list:
> > si-list-request@xxxxxxxxxxxxx
>
<http://us.mc1373.mail.yahoo.com/mc/compose?to=si-list-request@freelists
.org>
> with 'unsubscribe' in the Subject field
> >
> > or to administer your membership from a web page, go to:
> > //www.freelists.org/webpage/si-list
> >
> > For help:
> > si-list-request@xxxxxxxxxxxxx
>
<http://us.mc1373.mail.yahoo.com/mc/compose?to=si-list-request@freelists
.org>
> with 'help' in the Subject field
> >
> >
> > List technical documents are available at:
> > http://www.si-list.net <http://www.si-list.net/>
> >
> > List archives are viewable at:
> > //www.freelists.org/archives/si-list
> >
> > Old (prior to June 6, 2001) list archives are viewable at:
> > http://www.qsl.net/wb6tpu
> >
> >
> >
>
>
> --
> Steve Weir
> IPBLOX, LLC
> 150 N. Center St. #211
> Reno, NV 89501
> www.ipblox.com
>
> (775) 299-4236 Business
> (866) 675-4630 Toll-free
> (707) 780-1951 Fax
>
>
> ------------------------------------------------------------------
> To unsubscribe from si-list:
> si-list-request@xxxxxxxxxxxxx
>
<http://us.mc1373.mail.yahoo.com/mc/compose?to=si-list-request@freelists
.org>
> with 'unsubscribe' in the Subject field
>
> or to administer your membership from a web page, go to:
> //www.freelists.org/webpage/si-list
>
> For help:
> si-list-request@xxxxxxxxxxxxx
>
<http://us.mc1373.mail.yahoo.com/mc/compose?to=si-list-request@freelists
.org>
> with 'help' in the Subject field
>
>
> List technical documents are available at:
> http://www.si-list.net <http://www.si-list.net/>
>
> List archives are viewable at:
> //www.freelists.org/archives/si-list
>
> Old (prior to June 6, 2001) list archives are viewable at:
> http://www.qsl.net/wb6tpu
>
>
--
Steve Weir
IPBLOX, LLC
150 N. Center St. #211
Reno, NV 89501
www.ipblox.com
(775) 299-4236 Business
(866) 675-4630 Toll-free
(707) 780-1951 Fax
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
This email and any attachments are intended for the sole use of the named
recipient(s) and contain(s) confidential information that may be proprietary,
privileged or copyrighted under applicable law. If you are not the intended
recipient, do not read, copy, or forward this email message or any attachments.
Delete this email message and any attachments immediately.
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
//www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List technical documents are available at:
http://www.si-list.net
List archives are viewable at:
//www.freelists.org/archives/si-list
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu
Other related posts:
