>>>>> "polus" == polus <polus@xxxxxxxxxxx> writes:
> Greetings Everyone!
> How do the rest of you perform timing analysis. WE have XFX but
> not BLAST. Currently I do it in EXCELL with a home grown
> internal tool. This is cumbersome and time consuming.
> There has to be a better way, particularily for pre-layout
> design rather than having to wait for post layout data and using
> something like BLAST.
> Any suggestions?
BLAST can do pre-route timing analysis.
You can take a netlist from schematics, run BLAST and get a "global
slack report". You can also feed it a list of component x-y locations
and let it use manhattan lengths and simple driver models.
--
=============================================================================
Mike Mayer
mwmayer@xxxxxxx
------------------------------------------------------------------
To unsubscribe from si-list:
si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field
or to administer your membership from a web page, go to:
http://www.freelists.org/webpage/si-list
For help:
si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field
List archives are viewable at:
http://www.freelists.org/archives/si-list
or at our remote archives:
http://groups.yahoo.com/group/si-list/messages
Old (prior to June 6, 2001) list archives are viewable at:
http://www.qsl.net/wb6tpu