s.r.madhuchandra@xxxxxxxxxxxxx wrote: > > Hi folks > > we are having major problems in dimensional stability after our > relamination process > every panel in a single book behaves differently > snip < Madhu, Questions of a deep PCB fab nature are best posed on a forum like IPC's TechNet. Check www.ipc.org and go to the on-line resources section (on the left). Then check through the Email Forums. Best of luck, I know that compensation for the materials is a big issue and can be a limiting factor for complex boards. Regards, -- Jeff Seeger Applied CAD Knowledge Inc Chief Technical Officer Tyngsboro, MA 01879 jseeger "at" appliedcad "dot" com 978 649 9800 ------------------------------------------------------------------ To unsubscribe from si-list: si-list-request@xxxxxxxxxxxxx with 'unsubscribe' in the Subject field or to administer your membership from a web page, go to: //www.freelists.org/webpage/si-list For help: si-list-request@xxxxxxxxxxxxx with 'help' in the Subject field List archives are viewable at: //www.freelists.org/archives/si-list or at our remote archives: http://groups.yahoo.com/group/si-list/messages Old (prior to June 6, 2001) list archives are viewable at: http://www.qsl.net/wb6tpu