If you turn the crank backward to where it would stop does the shutter still not fire? If so, time for a repair. On Mon, Apr 27, 2009 at 6:34 AM, Sanders McNew <sanders@xxxxxxxxx> wrote: > Peter and Richard, thanks for the feedback. > > Peter: Actually, one of the shutterblades does appear > stained, now that you mention it, though it does not look > to be substantial. But what do I know? To answer your > other question, the crank was locked when film was > loaded in the camera. After opening the back, the > crank now turns freely as expected, but the shutter will > not fire. Does this help to pinpoint the problem? > > Richard: Moving the focus forward and back has no > effect. Alas. (And forgive me for forgetting to edit. I > am forgetful in the best of times.) > > Sanders > > > Peter K. wrote: > > >> ------------------------------ >> >> Date: Sun, 26 Apr 2009 12:26:13 -0700 >> Subject: [rollei_list] Re: T shutter jam >> From: "Peter K." <peterk727@xxxxxxxxx> >> >> Do you see any residue on the blades? If so then yes, maybe time for a >> visit >> to the Harry Fleenor repair center. >> If you open the back door and leave it open does it release the shutter at >> all? Have you tried turning the crank backward then forward? Does it move >> in >> both or only one direction? >> > > Richard Knoppow wrote: > > > ------------------------------ >> >> From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx> >> Subject: [rollei_list] Re: T shutter jam >> Date: Sun, 26 Apr 2009 14:57:31 -0700 >> >> >> >> ----- Original Message ----- >> From: "Sanders McNew" <sanders@xxxxxxxxx> >> To: <rollei_list@xxxxxxxxxxxxx> >> Sent: Sunday, April 26, 2009 6:06 AM >> Subject: [rollei_list] T shutter jam >> >> >> After shooting a dozen or so rolls through >> my newly-acquired T, the shutter jammed. >> The camera was cocked but the shutter >> button was frozen. I opened the back to >> remove the film but when I shut it again >> the shutter is still frozen. (Yes, the shutter >> release guard is open.) >> >> I am assuming that this is a job for a proper >> repair guy. Any thoughts as to cause? >> I know little about the Ts and thought it >> prudent to sound the pros before sending >> it out. Many thanks in advance for your >> advice and thoughts. >> >> Sanders >> >> Please edit when responding to the digest. >> I am not as familiar with the T as with earlier models >> but I think the mechanism is similar. Jamming can come from >> the shutter not being fully cocked. Its cocked by an >> articulated lever which is worked by the crank, the system >> works against a cam which is moved by the focus knob to >> adjust the throw to compensate for the shutter position >> changing with the distance focused on. If there is a bit of >> wear the lever will not move enough to fully cock the >> shutter. This may happen only at one end of the focus travel >> but will eventually happen all over. When the shutter is >> only partially cocked it will latch but not fire. I think >> that may be what is happening here. There is an internal >> adjustment for the lever stroke. That adjustment may be >> enough or, if there is enough wear, the eccentric adjustment >> or cam may need to be worked on. This is definitely a job >> for a pro. >> >> -- >> Richard Knoppow >> Los Angeles, CA, USA >> dickburk@xxxxxxxxxxxxx >> >> >> >> ------------------------------ >> > --- > Rollei List > > - Post to rollei_list@xxxxxxxxxxxxx > > - Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'in the > subject field OR by logging into www.freelists.org > > - Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with'unsubscribe' in > the subject field OR by logging into www.freelists.org > > - Online, searchable archives are available at > //www.freelists.org/archives/rollei_list > > -- Peter K Ó¿Õ¬