[rollei_list] Re: T shutter jam
- From: Sanders McNew <sanders@xxxxxxxxx>
- To: rollei_list@xxxxxxxxxxxxx
- Date: Mon, 27 Apr 2009 09:34:39 -0400
Peter and Richard, thanks for the feedback.
Peter: Actually, one of the shutterblades does appear
stained, now that you mention it, though it does not look
to be substantial. But what do I know? To answer your
other question, the crank was locked when film was
loaded in the camera. After opening the back, the
crank now turns freely as expected, but the shutter will
not fire. Does this help to pinpoint the problem?
Richard: Moving the focus forward and back has no
effect. Alas. (And forgive me for forgetting to edit. I
am forgetful in the best of times.)
Sanders
Peter K. wrote:
------------------------------
Date: Sun, 26 Apr 2009 12:26:13 -0700
Subject: [rollei_list] Re: T shutter jam
From: "Peter K." <peterk727@xxxxxxxxx>
Do you see any residue on the blades? If so then yes, maybe time for
a visit
to the Harry Fleenor repair center.
If you open the back door and leave it open does it release the
shutter at
all? Have you tried turning the crank backward then forward? Does it
move in
both or only one direction?
Richard Knoppow wrote:
------------------------------
From: "Richard Knoppow" <dickburk@xxxxxxxxxxxxx>
Subject: [rollei_list] Re: T shutter jam
Date: Sun, 26 Apr 2009 14:57:31 -0700
----- Original Message -----
From: "Sanders McNew" <sanders@xxxxxxxxx>
To: <rollei_list@xxxxxxxxxxxxx>
Sent: Sunday, April 26, 2009 6:06 AM
Subject: [rollei_list] T shutter jam
After shooting a dozen or so rolls through
my newly-acquired T, the shutter jammed.
The camera was cocked but the shutter
button was frozen. I opened the back to
remove the film but when I shut it again
the shutter is still frozen. (Yes, the shutter
release guard is open.)
I am assuming that this is a job for a proper
repair guy. Any thoughts as to cause?
I know little about the Ts and thought it
prudent to sound the pros before sending
it out. Many thanks in advance for your
advice and thoughts.
Sanders
Please edit when responding to the digest.
I am not as familiar with the T as with earlier models
but I think the mechanism is similar. Jamming can come from
the shutter not being fully cocked. Its cocked by an
articulated lever which is worked by the crank, the system
works against a cam which is moved by the focus knob to
adjust the throw to compensate for the shutter position
changing with the distance focused on. If there is a bit of
wear the lever will not move enough to fully cock the
shutter. This may happen only at one end of the focus travel
but will eventually happen all over. When the shutter is
only partially cocked it will latch but not fire. I think
that may be what is happening here. There is an internal
adjustment for the lever stroke. That adjustment may be
enough or, if there is enough wear, the eccentric adjustment
or cam may need to be worked on. This is definitely a job
for a pro.
--
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx
------------------------------
---
Rollei List
- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe'
in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with
'unsubscribe' in the subject field OR by logging into www.freelists.org
- Online, searchable archives are available at
//www.freelists.org/archives/rollei_list
Other related posts:
