[rollei_list] Re: Cord Ib
----- Original Message ----- From: "ERoustom" <eroustom@xxxxxxxxxxx> 
To: <rollei_list@xxxxxxxxxxxxx>
Sent: Wednesday, January 31, 2007 5:43 PM
Subject: [rollei_list] Re: Cord Ib
My 2.8C with the Rolleikin lets you rewind the film back into the 
cassette.
In the 2.8C the pressure plate is adjusted from one of two positions 
for either the 60x60 or the 24x36 frame.
Could it be different for the Rolleicord?
E.

On Jan 31, 2007, at 2:16 PM, Peter J Nebergall wrote:
Am I correct the Rolleikin works on what was like the Agfa Rapid System? No rewind, cartridge to cartridge, the idea Mama Kodak pirated to make 
126 Instamatic?
Do all Rolleikins provide alternative backs? This is the first one of 
those I've seen.
Peter Nebergall
The first Rolleikin had the special back because the standard back did not have provisions for adjusting. I think the very early ones had the film counter in the back also. All of the Rolleikin adaptors are set up to rewind the film into the cassette. The lower knob is used for this. I have and use a Rolleikin for the later cameras. I have one for my Rolleicord IV and another for my Rolleiflex 2.8E. However, I've never used the older version so I don't know it in detail. 

---
Richard Knoppow
Los Angeles, CA, USA
dickburk@xxxxxxxxxxxxx



---
Rollei List

- Post to rollei_list@xxxxxxxxxxxxx
- Subscribe at rollei_list-request@xxxxxxxxxxxxx with 'subscribe' in the subject field OR by logging into www.freelists.org
- Unsubscribe at rollei_list-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field OR by logging into www.freelists.org 

- Online, searchable archives are available at
http://www.freelists.org/archives/rollei_list

Other related posts: