HI Chris,
found something. Please check on github.
Regards,
Maik
Von: Maik Ehinger <m.ehinger@xxxxxxx>
An: racktables-users@xxxxxxxxxxxxx
Datum: 14.12.2015 16:15
Betreff: [racktables-users] Re: LinkManagement: Graphviz layout a
little off
Gesendet von: racktables-users-bounce@xxxxxxxxxxxxx
OK, that's a good point because i didn't test that.
I'll have a look.
Thanks,
Maik
Von: Chris James <chris@xxxxxxxxxxxx>
An: racktables-users@xxxxxxxxxxxxx
Datum: 14.12.2015 16:06
Betreff: [racktables-users] Re: LinkManagement: Graphviz layout a
little off
Gesendet von: racktables-users-bounce@xxxxxxxxxxxxx
Still really weird. No error, but map is blank now.
Maybe has something to do with parent child relationships?
In the current plugin, if I select a chassis it will show all 1st level
links of all children within the chassis. Now it seems to only show links
of the chassis itself, no children
Chris James
916-526-0737 x1002
chris@xxxxxxxxxxxx
Datacate, Inc.
2999 Gold Canal Drive
Rancho Cordova, CA 95670
http://www.datacate.com
On Mon, Dec 14, 2015 at 6:56 AM, Maik Ehinger <m.ehinger@xxxxxxx> wrote:
Hi Chris,
there are still some issues.
But all port types should be displayed. At the moment they all just look
the same ( same color and shape). I'll add this later.
Your gv map error should be also fixed on github now.
Regards,
Maik
Von: Chris James <chris@xxxxxxxxxxxx>
An: Maik Ehinger <m.ehinger@xxxxxxx>
Kopie: Chris James <chris@xxxxxxxxxxxx>,
racktables-users@xxxxxxxxxxxxx
Datum: 14.12.2015 15:41
Betreff: [racktables-users] Re: LinkManagement: Graphviz layout a
little off
Gesendet von: racktables-users-bounce@xxxxxxxxxxxxx
Cool, So I see the cytoscape map works now.
But still have error for virtually any other map.
I also notice the cytoscape is limited to only ethernet type ports, not
other port types like power, sas, custom etc.
Chris James
916-526-0737 x1002
chris@xxxxxxxxxxxx
Datacate, Inc.
2999 Gold Canal Drive
Rancho Cordova, CA 95670
http://www.datacate.com
On Mon, Dec 14, 2015 at 6:26 AM, Maik Ehinger <m.ehinger@xxxxxxx> wrote:
Hi Chris,
in the first version the ajax url for cytoscape data was not correct. Its
now fixed on github.
Regards,
Maik
Von: Chris James <chris@xxxxxxxxxxxx>
An: Maik Ehinger <m.ehinger@xxxxxxx>
Kopie: Chris James <chris@xxxxxxxxxxxx>
Datum: 14.12.2015 15:20
Betreff: Re: [racktables-users] Re: LinkManagement: Graphviz layout
a little off
Yes, Old plugin works 100% fine in all examples.
I did notice this code in the old plugin also.
In the new plugin Its very weird, only on some objects is this happening.
But I can also tell you the new piece of the new plugin the cytoscape
piece never works.
If you would like 1st place example, and you have teamviewer I would be
happy to show you real time.
Chris James
916-526-0737 x1002
chris@xxxxxxxxxxxx
Datacate, Inc.
2999 Gold Canal Drive
Rancho Cordova, CA 95670
http://www.datacate.com
On Sun, Dec 13, 2015 at 11:51 PM, Maik Ehinger <m.ehinger@xxxxxxx> wrote:
Hi Chris,
this line ist still in the old part of the code and should be called only
if you request a map of all objects in your Racktables installation. For a
single object this part isn't called at all.
This error must have something to do with the Pear Image GraphViz
installation. The Graphviz Object seems to be "null".
I test the plugin on a complete fresh install wihout any errors.
Did the old plugin work?
Regards,
Maik
Von: Chris James <chris@xxxxxxxxxxxx>
An: Chris James <chris@xxxxxxxxxxxx>
Kopie: racktables-users@xxxxxxxxxxxxx, Jonas Øgendahl Groth <
jog@xxxxxxxxxx>
Datum: 11.12.2015 23:59
Betreff: [racktables-users] Re: LinkManagement: Graphviz layout a
little off
Gesendet von: racktables-users-bounce@xxxxxxxxxxxxx
I did a little more digging, the actual error is:
Call to a member function addNode() on a non-object in
/var/www/plugins/linkmgmt.php on line 3055
On Fri, Dec 11, 2015 at 2:16 PM, Chris James <chris@xxxxxxxxxxxx> wrote:
Maik,
Very excited for this update, but do I need to do anything special to
upgrade?
I am receiving this error upon following the instructions:
The website encountered an error while retrieving
https://(fqdn)/index.php?module=redirect&page=object&tab=linkmgmt&object_id=1465&op=map&usemap=1
. It may be down for maintenance or configured incorrectly.
Thanks,
Chris
On Fri, Dec 11, 2015 at 6:52 AM, Maik Ehinger <m.ehinger@xxxxxxx> wrote:
Hello Jonas,
i have just updated the plugin.
Since it is still experimental it can be found here:
https://github.com/github138/myRT-contribs/blob/develop-0.20.x/LinkManagement/plugins/linkmgmt.php
It uses a different approach to build the graphviz map. It should produce
better graphs.
It also includes a cytoscape.js map version. Similar to this
http://js.cytoscape.org/demos/5b192c88616af2f75344/
It allows zooming and path highlighting.
But to make this work you need to add a few files to the Racktables
wwwroot/js directory. See Requirements Section of the plugin for details.
Feedback welcome.
Regards
Maik
Von: Jonas Øgendahl Groth <jog@xxxxxxxxxx>
An: "'racktables-users@xxxxxxxxxxxxx'" <
racktables-users@xxxxxxxxxxxxx>
Datum: 23.07.2015 08:30
Betreff: [racktables-users] Re: LinkManagement: Graphviz layout a
little off
Gesendet von: racktables-users-bounce@xxxxxxxxxxxxx
Hello Michal
Exactly. In my opinion this would give a more clear map of the
connections.
Best Regards
Jonas
From: =?UTF-8?B?TWljaGHFgiBTb2Nob8WE?= <kaszpir@xxxxxxxxx>
Date: Wed, 22 Jul 2015 16:19:21 +0200
Subject: [racktables-users] Re: LinkManagement: Graphviz layout a little
off
You say you want bottom box on the right side of the red box, and then
align all horizontally?
On Wed, Jul 22, 2015 at 4:00 PM, Jonas Øgendahl Groth <jog@xxxxxxxxxx>
wrote:
Hello All
We are using the Link management plugin and are very happy about the
functionality it brings. Right now a colleague is inputting hundreds
of ports and cables as part of updating the documentation.
However we have run into a bit of a problem as can be seen here:
http://sysblog.dk/wp-content/uploads/2015/07/badlayout.png
I am not sure how to change the input so that dot can figure this out
but to me it would make more sense if the “Frb7d-Kst3-2†object
was moved out to the right of “Kst3-Frb7d/DC2-5-1†allowing it to
place all straight lines.
Am I the only one who has run into this?
[image: cid:image002.png@01CDD87C.224CB850]
*Jonas Øgendahl Groth – Infrastructure Services*
IT Administrator *| * AAU IT Services
Phone: (+45) 9940 3470 * | *Email:jog@xxxxxxxxxx *| * Web
homes.ist.aau.dk/jog/
*AAU IT Services | *Selma Lagerlöfs Vej 300 – 3.1.46 *|* Aalborg
East *|*