[pure-silver] Re: Newbie Bulk Loader mistake

<quote who=Matthew Gaylen date=[040924 12:50]/>
> you also might want to check that you put the bulk film on the spool so  
> it's flowing straight into the light trap and now in an over/under  
> fashion.  I think on the Alden you have to put the film in so it looks  
> like it's rotating counter clockwise up into the light trap...
> 
> If you put it on clockwise, it has to make a u-turn into the light trap  
> and that might cause friction and slipping.

    That part I got right. I had a 50% of doing that part correctly. The
problem is definately inside the film canister..

   Thanks
   
   J

-- 
Justin F. Knotzke 
jknotzke@xxxxxxxxxx 
http://www.shampoo.ca 
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: