[pure-silver] Re: Jobo roller base.
- From: Jim Brick <jim@xxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Tue, 03 Jul 2007 17:22:17 -0700
At 01:05 PM 7/3/2007 -0700, Bob Adler wrote:
With the CPP2 you don't HAVE to have a water panel, but I do and it
really helps.
Best of luck,
Bob
The rinse and wash water comes in through the plumbing rather than
the tempered water bath, as you know... You can get by without a
panel for B&W if you have reasonable control over the water inlet
temp so as not to induce reticulation. But if you process color (any
color) a water panel with a bleed is pretty much required.
:-)
Jim
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
