[pure-silver] Re: Fixing after indirect toning - a deeper question

  • From: Christopher Woodhouse <chris.woodhouse@xxxxxxxxxxxx>
  • To: <pure-silver@xxxxxxxxxxxxx>
  • Date: Sun, 15 Jan 2006 20:51:28 +0000

Thanks for the clarification. Your recommendation seems to confirm common
experience with the staining ability of brown toners. Obviously if you only
partially indirect tone (for colour reasons) it is not only risky as far as
residual undeveloped silver but also as it becomes almost unrepeatable,
since the colour change in the tray is quite rapid.


On 15/1/06 20:04, "Richard Knoppow" <dickburk@xxxxxxxxxxxxx> wrote:

> 
> ----- Original Message -----
> From: "DarkroomMagic" <info@xxxxxxxxxxxxxxxx>
> To: "PureSilverNew" <pure-silver@xxxxxxxxxxxxx>
> Sent: Sunday, January 15, 2006 11:35 AM
> Subject: [pure-silver] Re: Fixing after indirect toning - a
> deeper question
> 
> 
>> Richard
>> 
>> Just one day ago, you said that refixing was required
>> after sulfide toning.
>> 
>> Which is it?
>> 
>> 
>> 
>> 
>> 
>> 
>> Regards
>> 
>> 
>> 
>> Ralph W. Lambrecht
>> 
>> http://www.darkroomagic.com
>> 
>     Fixing is necessary after Nelson's Gold Toner but not
> after most others. It is not after polysulfide toners like
> Kodak Brown Toner or bleach and redevelop toners. It does
> not seem necessary after Hypo-Alum toner.
> 
> ---
> Richard Knoppow
> Los Angeles, CA, USA
> dickburk@xxxxxxxxxxxxx
> 
> ==============================================================================
> ===============================
> To unsubscribe from this list, go to www.freelists.org and logon to your
> account (the same e-mail address and password you set-up when you subscribed,)
> and unsubscribe from there.
> 

-- 
Regards Chris Woodhouse
    ....  __o
    ..    -\<,
  ......(_)/(_).......................




=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your 
account (the same e-mail address and password you set-up when you subscribed,) 
and unsubscribe from there.

Other related posts: