[pure-silver] Re: DeVERE 504 manual and help with filter/timer keyboard controller made by ZBE inc. please? Reply
- From: "GERRY (GPCX) " <gpcx@xxxxxxxxxxxx>
- To: pure-silver@xxxxxxxxxxxxx
- Date: Sat, 29 Jan 2011 17:17:10 +0000
Hi,
Thanks for the nice and rapid reply.
Yes i did contact RH Designs: they think that there lead might work but,
do not know for sure as they don't have experience of a classed loop system.
I am trying not to spend too much money the lead is only around £30 but
may or not work, or worse might damage the enlarger electronics, which i
believe are no longer available. I have spedn around 6 months on a 5108
which in the end i had to scrap as it was just too much for me, it was
rather rusty as well, as it was used by Ford Motor co., many years sago,
and left to rot.
Thanks
Gerry
On 29/01/2011 17:10, pdesmidt tds.net wrote:
I'd contact RH Designs. They always been very helpful when I talk to
them.
=============================================================================================================
To unsubscribe from this list, go to www.freelists.org and logon to your
account (the same e-mail address and password you set-up when you subscribed,)
and unsubscribe from there.
Other related posts:
- » [pure-silver] Re: DeVERE 504 manual and help with filter/timer keyboard controller made by ZBE inc. please? Reply - GERRY (GPCX)
