[pskmail] Re: jpskmail 0.3.8 beta test
- From: John Douyere <vk2eta@xxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Sat, 10 Oct 2009 16:20:13 +1100
Hi Paul,
Which version of the server are you running?
For information, the client is passive from a protocol's perspective and
will only respond to a server's request except at connect.
So the main question is why is the server not sending a new status frame (a
short frame) after the timeout period which is about 10 seconds for PSK250
and about double that for PSK125.
Regards,
John
On Sat, Oct 10, 2009 at 10:47 AM, Paul <pa0son@xxxxxxxxx> wrote:
> I installed fldigi 3.13AM and jpskmail 0.3.8
> Installation went smooth. Fldigi RX cursor remains near the center
> frequency.
> Works fine.
> Pinging and connecting without problem. (server pa0son-4 7048)
> BUT....when either the client or the server looses a frame the
> communication
> stops. No polling.
> A command like QTC? Doesn't trigger TX.
> When all frames are copied by either client and server the throughput is
> fast and stable.
> One missing frame stops the throughput.
> Restarting jpskmail works fine, unfortunately the first missed frame ends
> the communication again.
>
> I hope this report helps.
>
>
> 73, Paul PA0SON
>
>
> -----Oorspronkelijk bericht-----
> Van: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx]
> Namens Rein Couperus
> Verzonden: vrijdag 9 oktober 2009 12:56
> Aan: pskmail@xxxxxxxxxxxxx
> Onderwerp: [pskmail] Re: jpskmail 0.3.8 beta test
>
> I have updated the wiki FAQ for the new config values for fldigi.
>
> They are in: http://pskmail.wikispaces.com/FAQ+Radio
>
> With these values fldigi should be configured OK for pskmail, and the
> jumping
> around should be minimal.
>
> When that does not help, try using AFC OFF with PSK250...
>
> 73,
>
> Rein PA0R
>
> > -----Ursprüngliche Nachricht-----
> > Von: "Andy obrien" <k3ukandy@xxxxxxxxx>
> > Gesendet: 09.10.09 11:32:23
> > An: pskmail@xxxxxxxxxxxxx
> > Betreff: [pskmail] Re: jpskmail 0.3.8 beta test
>
>
> > Installed OK, and seems to be working fine. Now if only the next
> > release of FLDIGI would come out with a way to stop the waterfall
> > cursor leaving the center frequency by 300-400 Hz .
> > Thanks
> > Andy K3UK
> >
> >
> >
> > On Fri, Oct 9, 2009 at 3:28 AM, Pär Crusefalk <per@xxxxxxxxxxxx> wrote:
> > > Hi all,
> > >
> > > There is a beta of the coming 0.3.8 release here:
> > > http://www.crusefalk.se/jpskmailinstall/
> > >
> > > There are installers for windows and linux as well as an archive for
> > > others (Macs etc).
> > >
> > > Test reports are highly appreciated!
> > >
> > > 73 de Per, sm0rwo
> > >
> > >
> > >
> > >
> >
> >
>
> --
> http://pa0r.blogspirit.com
>
>
>
>
Other related posts:
