Paul, I tested with pa0son-4 yesterday with the new server and it worked fine. Maybe we should look at it together to find the problem... Give me a ring when you have time... 73, Rein PA0R > -----Ursprüngliche Nachricht----- > Von: "Paul" <pa0son@xxxxxxxxx> > Gesendet: 10.10.09 01:48:17 > An: <pskmail@xxxxxxxxxxxxx> > Betreff: [pskmail] Re: jpskmail 0.3.8 beta test > I installed fldigi 3.13AM and jpskmail 0.3.8 > Installation went smooth. Fldigi RX cursor remains near the center > frequency. > Works fine. > Pinging and connecting without problem. (server pa0son-4 7048) > BUT....when either the client or the server looses a frame the communication > stops. No polling. > A command like QTC? Doesn't trigger TX. > When all frames are copied by either client and server the throughput is > fast and stable. > One missing frame stops the throughput. > Restarting jpskmail works fine, unfortunately the first missed frame ends > the communication again. > > I hope this report helps. > > > 73, Paul PA0SON > > > -----Oorspronkelijk bericht----- > Van: pskmail-bounce@xxxxxxxxxxxxx [mailto:pskmail-bounce@xxxxxxxxxxxxx] > Namens Rein Couperus > Verzonden: vrijdag 9 oktober 2009 12:56 > Aan: pskmail@xxxxxxxxxxxxx > Onderwerp: [pskmail] Re: jpskmail 0.3.8 beta test > > I have updated the wiki FAQ for the new config values for fldigi. > > They are in: http://pskmail.wikispaces.com/FAQ+Radio > > With these values fldigi should be configured OK for pskmail, and the > jumping > around should be minimal. > > When that does not help, try using AFC OFF with PSK250... > > 73, > > Rein PA0R > > > -----Ursprüngliche Nachricht----- > > Von: "Andy obrien" <k3ukandy@xxxxxxxxx> > > Gesendet: 09.10.09 11:32:23 > > An: pskmail@xxxxxxxxxxxxx > > Betreff: [pskmail] Re: jpskmail 0.3.8 beta test > > > > Installed OK, and seems to be working fine. Now if only the next > > release of FLDIGI would come out with a way to stop the waterfall > > cursor leaving the center frequency by 300-400 Hz . > > Thanks > > Andy K3UK > > > > > > > > On Fri, Oct 9, 2009 at 3:28 AM, Pär Crusefalk <per@xxxxxxxxxxxx> wrote: > > > Hi all, > > > > > > There is a beta of the coming 0.3.8 release here: > > > http://www.crusefalk.se/jpskmailinstall/ > > > > > > There are installers for windows and linux as well as an archive for > > > others (Macs etc). > > > > > > Test reports are highly appreciated! > > > > > > 73 de Per, sm0rwo > > > > > > > > > > > > > > > > > > -- > http://pa0r.blogspirit.com > > > > -- http://pa0r.blogspirit.com