I haven't touched the server code for quite some time, the archive on sharon (version 0.5.3 of the server) should be up-to-date. 73, Rein Pa0R > -----Ursprüngliche Nachricht----- > Von: pskmail@xxxxxxxxxxxxx > Gesendet: 10.01.08 16:07:58 > An: pskmail@xxxxxxxxxxxxx > Betreff: [pskmail] Re: Today's questions > > Hi, > > I have changed rflinkserver.pl and rewritten send_mail and added > parameters to pskmailrc.pl. I have submitted the change to subversion. As > I wrote this at work (while waiting for another job to finish) I have not > tested it so I will have to test tonight when I get home. > > I noticed that the subversion repo had not been updated since november, is > that up to date? Also the repository is at svn://www.crusefalk.se/pskmail > now but I should have notified that change (hope I did). > > 73 de Per, sm0rwo > > > Rein Couperus skrev: > > No, please go ahead... > > > > Rein > > > >> -----Ursprüngliche Nachricht----- > >> Von: pskmail@xxxxxxxxxxxxx > >> Gesendet: 10.01.08 12:18:57 > >> An: pskmail@xxxxxxxxxxxxx > >> Betreff: [pskmail] Re: Today's questions > > > > > >> > >> > >> Rein Couperus skrev: > >> <cut/> > >> > The second part is more difficult, I don't think anybody has yet tried > >> to > >> > use the gmail > >> > SMTP server? > >> > > >> > Normally there is no problem when you use the SMTP server of your main > >> > provider, > >> > as most of them check the ip range. > >> > > >> > I have not tried the gmail server yet, but will do so after I have > >> > finished soldering my > >> > new receive loop preamp for use in the CQ160-CW contest :) > >> > > >> > If anybody can give some info on this in the mean time that would be > >> > appreciated. > >> > > >> > 73, > >> > > >> > Rein PA0R > >> > >> Gmail seems to use TLS authentication so it will NOT work at the moment. > >> We need to add a method that authenticates using TLS, like this: > >> > >> use Net::SMTP::TLS; > >> my $mailer = new Net::SMTP::TLS( > >> 'your.mail.host', > >> Hello => 'some.host.name', > >> Port => 25, > >> User => 'emailguy', > >> Password=> 's3cr3t'); > >> $mailer->mail('emailguy@xxxxxxxxxxxxxx'); > >> $mailer->to('someonecool@xxxxxxxxxxxxxx'); > >> $mailer->data; > >> $mailer->datasend("Sent thru TLS!"); > >> $mailer->dataend; > >> $mailer->quit; > >> > >> Also, we need user and password in pskmailrc.pl. > >> I can write a suggestion tonight, comments before I do ? > >> > >> 73 de Per, sm0rwo > >> > >> > >> > > > > -- > > http://pa0r.blogspirit.com > > > > > > > -- > Pär Crusefalk > Tjäderslingan 34 > 148 40 Segersäng > Mob: +46768800670 > > > -- http://pa0r.blogspirit.com