[pskmail] Re: New PSKmail 0.3.7 downloaded.
- From: Rein Couperus <rein@xxxxxxxxxxxx>
- To: pskmail@xxxxxxxxxxxxx
- Date: Tue, 25 Aug 2009 17:56:16 +0200
3,13 wil do the trick...
Rein
> -----Ursprüngliche Nachricht-----
> Von: "Fred Reiselt" <freiselt@xxxxxxxxxxxxx>
> Gesendet: 25.08.09 17:48:23
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: New PSKmail 0.3.7 downloaded.
> That is what I am running now. I downgraded to 3.10.2, and then to 3.10.
>
> Fred
>
> Rein Couperus wrote:
> > Back to fldigi 3.10?
> >
> > Rein
> >
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: "Fred Reiselt" <freiselt@xxxxxxxxxxxxx>
> >> Gesendet: 25.08.09 17:43:01
> >> An: pskmail@xxxxxxxxxxxxx
> >> Betreff: [pskmail] Re: New PSKmail 0.3.7 downloaded.
> >>
> >
> >
> >
> >> I added the extra two characters with no improvement. I added about 15
> >> extra characters to the end and saw no difference with zero, two, or
> >> fifteen. I also cleaned out the ~/.fldigi directory, thinking that
> >> something left over might be causing a problem. But, it did not improve.
> >>
> >> Still looking.....
> >>
> >> 73,
> >> Fred WB5CON
> >>
> >> Per Crusefalk wrote:
> >>
> >>> I have heard this happen to clients but not to servers, guess you won
> >>> that competition. I dont know what causes it, pulseaudio?
> >>>
> >>> Anyway, I suppose you could try to add extra characters to every frame.
> >>> Try changing line 1198 of arq.pm into:
> >>> $sendstring = "\037" . $sendstring . "\000" . "--";
> >>>
> >>> The "--" at the end are two extra characters added to each frame.
> >>>
> >>> 73 de Per, sm0rwo
> >>>
> >>>
> >>> mån 2009-08-24 klockan 15:03 -0500 skrev Fred Reiselt:
> >>>
> >>>
> >>>> Well, I have tried fldigi 3.12.3, 3.12.4, 3.10.2, and 3.10. All are
> >>>> cutting off the transmission early. I am using hardware PTT on the
> >>>> serial port with RTS and DTS. I have also tried an older 0.8.8 pskmail
> >>>> server, but no change from 0.9.8. I tried to use VOX on the Kenwood but
> >>>> it only works on the mic jack and not the audio inputs on the rear panel.
> >>>>
> >>>> Perhaps the install scripts on fldigi did not over write everything when
> >>>> I downgraded. I don't know but I'll keep searching.
> >>>>
> >>>> This is the same exact hardware I have been using for the last year,
> >>>> except for the new hard drive and rebuilt software.
> >>>>
> >>>> 73,
> >>>> Fred
> >>>>
> >>>> PS - The WB5CON-3 is the client laptop and rig.
> >>>>
> >>>> Russell Blair wrote:
> >>>>
> >>>>
> >>>>> Fred I'm running fldigi 3.12 as well and I loked around to see if I add
> >>>>> some delay and was unable to find anything, It might be in the server
> >>>>> software were you can add some space's as in the Postamble in 0.3.7. I
> >>>>> did add some dashs in the postamble there in 0.3.7..
> >>>>>
> >>>>> Russell
> >>>>> 1- Whoever said nothing is impossible never tried slamming a revolving
> >>>>> door!
> >>>>> 2- A government big enough to give you everything you want, is strong
> >>>>> enough to take everything you have.
> >>>>> - Thomas Jefferson
> >>>>>
> >>>>> " IN GOD WE TRUST "
> >>>>>
> >>>>> Russell Blair (NC5O)
> >>>>> Skype-Russell.Blair
> >>>>> Hell Field #300
> >>>>> DRCC #55
> >>>>> 30m Dig-group #693
> >>>>>
> >>>>>
> >>>>> --- On Mon, 8/24/09, Fred Reiselt <freiselt@xxxxxxxxxxxxx> wrote:
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>>>> From: Fred Reiselt <freiselt@xxxxxxxxxxxxx>
> >>>>>> Subject: [pskmail] Re: New PSKmail 0.3.7 downloaded.
> >>>>>> To: pskmail@xxxxxxxxxxxxx
> >>>>>> Date: Monday, August 24, 2009, 8:47 AM
> >>>>>> There is a problem with the server.
> >>>>>> It is cutting off the end of the transmission. It must be a
> >>>>>> problem with fldigi 3.12. I have looked in the fldigi config
> >>>>>> and poked around in arq.pm to add a few spaces to the
> >>>>>> postamble but have not found the secret yet.
> >>>>>>
> >>>>>> Any hints would be appreciated. Or, should I return to 3.10
> >>>>>> fldigi?
> >>>>>>
> >>>>>> 73,
> >>>>>> Fred
> >>>>>>
> >>>>>> Fred Reiselt wrote:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> I will check my server today and see if there is a
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> problem on this end. The server could be cutting off the TX
> >>>>>> data too soon so the client can not receive it properly.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> 73
> >>>>>>> Fred WB5CON
> >>>>>>>
> >>>>>>> Rein Couperus wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>> This is clearly not a TX problem but an RX
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>> problem. The client does not react to
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>> the polls...
> >>>>>>>>
> >>>>>>>> You should see this on your link status indicator
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>> (not green).
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>> Rein PA0R
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> -----Ursprüngliche Nachricht-----
> >>>>>>>>> Von: "Pär Crusefalk" <per@xxxxxxxxxxxx>
> >>>>>>>>> Gesendet: 23.08.09 22:34:29
> >>>>>>>>> An: pskmail@xxxxxxxxxxxxx
> >>>>>>>>> Betreff: [pskmail] Re: New PSKmail 0.3.7
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> downloaded.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> Hi Russel,
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>> I looked through the log at wb5con and found
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> this QSO:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:49Z): h Biu ARae r N
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 00uNC5O:7 279E
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:53Z): TX (2009-08-23
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 18:53Z): 00uWB5CON:71 055E
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:53Z): t e 7 r 00uNC5O:26
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> !3259.64N/09640.80Wy NC5O jPSKMail-v 0.3.7E10A
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:54Z): t TX (2009-08-23
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 18:54Z): QSL NC5O de WB5CON 407A
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:54Z): tUu e o ee o c t e u
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> iine m 00cNC5O:1024 WB5CON:24 5581A
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:55Z): couel on
> >>>>>>>>> TX (2009-08-23 18:55Z): 0EkWB5CON:24 NC5O:1024
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 5653A
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:55Z): naee TX (2009-08-23
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 18:55Z): 0E!
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> TX (2009-08-23 18:55Z): Hi NC5O, pse update
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> your record6C550E"
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> TX (2009-08-23 18:55Z): TX (2009-08-23
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 18:55Z): A5730Es" A96A
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:55Z): ad RX (2009-08-23
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 18:55Z): nen
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> TX (2009-08-23 18:55Z): 0Ep" ED6A
> >>>>>>>>> RX (2009-08-23 18:55Z): ee tc
> >>>>>>>>> TX (2009-08-23 18:55Z): 0Ep" ED6A
> >>>>>>>>> RX (2009-08-23 18:55Z): eDe te TX (2009-08-23
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 18:55Z): 0Ep" ED6A
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> RX (2009-08-23 18:55Z): Stki
> >>>>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>>>> RX (2009-08-23 18:56Z): ee es
> >>>>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>>>> RX (2009-08-23 18:56Z): eoeTn
> >>>>>>>>> RX (2009-08-23 18:56Z): l'
> >>>>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>>>> RX (2009-08-23 18:56Z): attt o
> >>>>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>>>> RX (2009-08-23 18:56Z): nex p
> >>>>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>>>>
> >>>>>>>>> So the position beacon was ok but during the
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> connected session the server did not get any good frames
> >>>>>> from you.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> I guess that could be due to conditions, local
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> QRM or something else?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> The mentioned fldigi problem is that complete
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> frames are always sent to fldigi and it in turn keys the
> >>>>>> transmitter,
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> sends the frame and stops the transmission.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> Some have had a problem where fldigi stops the transmitter
> >>>>>> too soon,
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> so there is no local monitor and can not be
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> any. We would have to receive what fldigi transmits for
> >>>>>> that. The easiest
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> way to indicate this issue is just to listen
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> to the frames, if they sound cut (when compared to others)
> >>>>>> then they
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> probably are. But, this is not a general issue
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> and it might not at all have anything to do with your
> >>>>>> connected session
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> above.
> >>>>>>>>>
> >>>>>>>>> 73 de Per, sm0rwo
> >>>>>>>>>
> >>>>>>>>> sön 2009-08-23 klockan 12:52 -0700 skrev
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> Russell Blair:Well OK they are both empty, but if I done get
> >>>>>> a connect responce from the server to show me that I connect
> >>>>>> to the server then I cant up date the server, maybe WB5CON
> >>>>>> can look and his server log and see whats missing from my
> >>>>>> request for connection. Oh the listening is also grayed out
> >>>>>> on my gue interface. Is there some place where I can look
> >>>>>> and see what being sent during my requset for connection.
> >>>>>> Russell 1- Whoever said nothing is impossible never tried
> >>>>>> slamming a revolving door! 2- A government big enough to
> >>>>>> give you everything you want, is strong enough to take
> >>>>>> everything you have. - Thomas Jefferson " IN GOD WE TRUST "
> >>>>>> Russell Blair (NC5O) Skype-Russell.Blair Hell Field #
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> 300 DRCC #55 30m Dig-group #693 --- On Sun,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 8/23/09, Per Crusefalk <
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> per@xxxxxxxxxxxx>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> wrote: > From: Per Crusefalk <per@xxxxxxxxxxxx>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> Subject: [pskmail] Re: New PSKmail 0.3.7 downloaded.
> >>>>>>> To: pskmail@
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>> freelists.org> Date: Sunday, August 23,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> 2009, 2:40 PM > Hi Russel, > >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> They are both empty by default as extra
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> characters are > mostly not > needed. I have heard
> >>>>>> stations that have their frames cut > short, some >
> >>>>>> frames just barely make it and others lack the EOT >
> >>>>>> character so I put > those fields there to be able to
> >>>>>> handle it just in case. >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>> 73 de Per, sm0rwo > > > sön
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>> 2009-08-23 klockan 12:25 -0700 skrev
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> Russell Blair: > > Ok, well I did as you
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> asked and I saw nothing on > WB5CON log, When I go the
> >>>>>> the Frame Postamble there is > nothing there as well as
> >>>>>> the Peramble. should ther be > something in there for me
> >>>>>> to put spaces in front of.? > > > > Russell >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> 1- Whoever said nothing is impossible never
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> tried > slamming a revolving door! >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>> 2- A government big enough to give you
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>> everything you > want, is
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> strong enough to take everything you have.
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> - Thomas Jefferson > >
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>>> " IN GOD WE TRUST " > > >
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>> Russell Blair (NC5O) > > Skype-
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> Russell.Blair > > Hell Field #300 >
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>> DRCC #55 > > 30m Dig-group #693
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>>>>>>>> --- On Sun, 8/23/09,
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>>>>>>>>>>>
> >>>>>> Per Crusefalk <per@xxxxxxxxxxxx>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> wrote: > > > > > From: Per
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> Crusefalk <per@xxxxxxxxxxxx>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> Subject:
> >>>>>>>>> [pskmail] Re: New PSKmail 0.3.7 >
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> downloaded. > > > To: pskmail@
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> freelists.org> > > Date: Sunday,
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> August 23, 2009, 12:57 PM > > > Hi Russel, >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>> Can you try agn and look at the log
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>>>>>>>
> >>>>>> page at > WB5CON while > > > you are trying?
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> That page is here: http://
> >>>>>>>>> wb5con.homedns.org/index.shtml> > > I
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> have heard a few stations (but I'm not saying > that IS
> >>>>>> the > > > problem) > > > where fldigi is
> >>>>>> not properly finishing the > frames, it stops > >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> the tx too > > > soon.
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>>> If that is the case then add a few spaces >
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> to "frame > > > postamble"
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> on > > > the modem tab of the
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> preferences dialog. > > > > > > 73 de Per,
> >>>>>> sm0rwo > > > > > > > > > sön
> >>>>>> 2009-08-23 klockan 10:42 -0700 skrev Russell > Blair:
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>> I downloaded the new version 0.3.7 of
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>>>
> >>>>>>>>> PSKmail and been > > > trying to
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>> connect to WB5CON to update the server, > however I >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>> cant seem to get connected, each time I try to
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>> connect > > > WB5CON respondes back to me but
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> I dont seem to > respond back > > > to him. I'm
> >>>>>> using the same setting as was in > 0.3.
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> 6 version. > > > Any Help. > >
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>>>> Russell > > > > 1-
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>> Whoever said nothing is impossible never > tried >
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>> slamming a revolving door! > > > > 2-
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>> A government big enough to give you > everything
> >>>>>> you
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>>>>> want, is strong enough to take
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>>>>>>>>
> >>>>>> everything you > have. > > > > -
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> Thomas Jefferson > > > > > >
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> " IN GOD WE TRUST " > > > > > >
> >>>>>>>> Russell Blair (NC5O) > > > >
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>> Skype-Russell.Blair > > > > Hell Field #
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>> 300 > > > > DRCC #55 > >
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>> 30m Dig-group #693 > > > > > >
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>
> >>>>>>>> ------------------------------------------------------------------------
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> No virus found in this incoming message.
> >>>>>>>> Checked by AVG - www.avg.com Version: 8.5.409 /
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>> Virus Database: 270.13.65/2322 - Release Date: 08/23/09
> >>>>>> 18:03:00
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>> ------------------------------------------------------------------------
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>> No virus found in this incoming message.
> >>>>>>> Checked by AVG - www.avg.com Version: 8.5.409 / Virus
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>> Database: 270.13.65/2322 - Release Date: 08/23/09 18:03:00
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>
> >>>>>>
> >>>>>>
> >>>>>
> >>>>>
> >>>>> ------------------------------------------------------------------------
> >>>>>
> >>>>>
> >>>>> No virus found in this incoming message.
> >>>>> Checked by AVG - www.avg.com
> >>>>> Version: 8.5.409 / Virus Database: 270.13.65/2322 - Release Date:
> >>>>> 08/23/09 18:03:00
> >>>>>
> >>>>>
> >>>>>
> >>>>>
> >>>
> >>> ------------------------------------------------------------------------
> >>>
> >>>
> >>> No virus found in this incoming message.
> >>> Checked by AVG - www.avg.com
> >>> Version: 8.5.409 / Virus Database: 270.13.65/2323 - Release Date:
> >>> 08/24/09 06:05:00
> >>>
> >>>
> >>>
> >>
> >
> >
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.409 / Virus Database: 270.13.66/2325 - Release Date: 08/25/09
> > 06:08:00
> >
> >
>
>
--
http://pa0r.blogspirit.com
Other related posts:
