[pskmail] Re: New PSKmail 0.3.7 downloaded.

  • From: Rein Couperus <rein@xxxxxxxxxxxx>
  • To: pskmail@xxxxxxxxxxxxx
  • Date: Tue, 25 Aug 2009 17:45:32 +0200

Back to fldigi 3.10?

Rein

> -----Ursprüngliche Nachricht-----
> Von: "Fred Reiselt" <freiselt@xxxxxxxxxxxxx>
> Gesendet: 25.08.09 17:43:01
> An: pskmail@xxxxxxxxxxxxx
> Betreff: [pskmail] Re: New PSKmail 0.3.7 downloaded.


> I added the extra two characters with no improvement. I added about 15 
> extra characters to the end and saw no difference with zero, two, or 
> fifteen. I also cleaned out the ~/.fldigi directory, thinking that 
> something left over might be causing a problem. But, it did not improve.
> 
> Still looking.....
> 
> 73,
> Fred WB5CON
> 
> Per Crusefalk wrote:
> > I have heard this happen to clients but not to servers, guess you won
> > that competition. I dont know what causes it, pulseaudio?
> >
> > Anyway, I suppose you could try to add extra characters to every frame.
> > Try changing line 1198 of arq.pm into:
> > $sendstring = "\037" . $sendstring . "\000" . "--";
> >
> > The "--" at the end are two extra characters added to each frame.
> >
> > 73 de Per, sm0rwo
> >
> >
> > mån 2009-08-24 klockan 15:03 -0500 skrev Fred Reiselt:
> >   
> >> Well, I have tried fldigi 3.12.3, 3.12.4, 3.10.2, and 3.10. All are 
> >> cutting off the transmission early. I am using hardware PTT on the 
> >> serial port with RTS and DTS.  I have also tried an older 0.8.8 pskmail 
> >> server, but no change from 0.9.8. I tried to use VOX on the Kenwood but 
> >> it only works on the mic jack and not the audio inputs on the rear panel.
> >>
> >> Perhaps the install scripts on fldigi did not over write everything when 
> >> I downgraded. I don't know but I'll keep searching.
> >>
> >> This is the same exact hardware I have been using for the last year, 
> >> except for the new hard drive and rebuilt software.
> >>
> >> 73,
> >> Fred
> >>
> >> PS - The WB5CON-3 is the client laptop and rig.
> >>
> >> Russell Blair wrote:
> >>     
> >>> Fred I'm running fldigi 3.12 as well and I loked around to see if I add 
> >>> some delay and was unable to find anything, It might be in the server 
> >>> software were you can add some space's as in the Postamble in 0.3.7. I 
> >>> did add some dashs in the postamble there in 0.3.7..
> >>>
> >>> Russell 
> >>> 1- Whoever said nothing is impossible never tried slamming a revolving 
> >>> door!
> >>> 2- A government big enough to give you everything you want, is strong 
> >>> enough to take everything you have. 
> >>> - Thomas Jefferson
> >>>
> >>> " IN GOD WE TRUST " 
> >>>
> >>> Russell Blair (NC5O)
> >>>   Skype-Russell.Blair
> >>>   Hell Field #300
> >>>   DRCC #55
> >>>   30m Dig-group #693
> >>>
> >>>
> >>> --- On Mon, 8/24/09, Fred Reiselt <freiselt@xxxxxxxxxxxxx> wrote:
> >>>
> >>>   
> >>>       
> >>>> From: Fred Reiselt <freiselt@xxxxxxxxxxxxx>
> >>>> Subject: [pskmail] Re: New PSKmail 0.3.7 downloaded.
> >>>> To: pskmail@xxxxxxxxxxxxx
> >>>> Date: Monday, August 24, 2009, 8:47 AM
> >>>> There is a problem with the server.
> >>>> It is cutting off the end of the transmission. It must be a
> >>>> problem with fldigi 3.12. I have looked in the fldigi config
> >>>> and poked around in arq.pm to add a few spaces to the
> >>>> postamble but have not found the secret yet.
> >>>>
> >>>> Any hints would be appreciated. Or, should I return to 3.10
> >>>> fldigi?
> >>>>
> >>>> 73,
> >>>> Fred
> >>>>
> >>>> Fred Reiselt wrote:
> >>>>     
> >>>>         
> >>>>> I will check my server today and see if there is a
> >>>>>       
> >>>>>           
> >>>> problem on this end. The server could be cutting off the TX
> >>>> data too soon so the client can not receive it properly.
> >>>>     
> >>>>         
> >>>>> 73
> >>>>> Fred  WB5CON
> >>>>>
> >>>>> Rein Couperus wrote:
> >>>>>       
> >>>>>           
> >>>>>> This is clearly not a TX problem but an RX
> >>>>>>         
> >>>>>>             
> >>>> problem. The client does not react to
> >>>>     
> >>>>         
> >>>>>> the polls...
> >>>>>>
> >>>>>> You should see this on your link status indicator
> >>>>>>         
> >>>>>>             
> >>>> (not green).
> >>>>     
> >>>>         
> >>>>>> Rein PA0R
> >>>>>>
> >>>>>>
> >>>>>>   
> >>>>>>         
> >>>>>>             
> >>>>>>> -----Ursprüngliche Nachricht-----
> >>>>>>> Von: "Pär Crusefalk" <per@xxxxxxxxxxxx>
> >>>>>>> Gesendet: 23.08.09 22:34:29
> >>>>>>> An: pskmail@xxxxxxxxxxxxx
> >>>>>>> Betreff: [pskmail] Re: New PSKmail 0.3.7
> >>>>>>>           
> >>>>>>>               
> >>>> downloaded.
> >>>>     
> >>>>         
> >>>>>>>      
> >>>>>>>           
> >>>>>>>               
> >>>>>> Hi Russel,
> >>>>>>   
> >>>>>>         
> >>>>>>             
> >>>>>>> I looked through the log at wb5con and found
> >>>>>>>           
> >>>>>>>               
> >>>> this QSO:
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:49Z): h Biu ARae r N
> >>>>>>>           
> >>>>>>>               
> >>>> 00uNC5O:7 279E
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:53Z): TX (2009-08-23
> >>>>>>>           
> >>>>>>>               
> >>>> 18:53Z): 00uWB5CON:71 055E
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:53Z): t e 7 r 00uNC5O:26
> >>>>>>>           
> >>>>>>>               
> >>>> !3259.64N/09640.80Wy NC5O jPSKMail-v 0.3.7E10A
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:54Z): t TX (2009-08-23
> >>>>>>>           
> >>>>>>>               
> >>>> 18:54Z): QSL NC5O de WB5CON 407A
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:54Z): tUu e o ee o c t e u
> >>>>>>>           
> >>>>>>>               
> >>>> iine m 00cNC5O:1024 WB5CON:24 5581A
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:55Z): couel on
> >>>>>>> TX (2009-08-23 18:55Z): 0EkWB5CON:24 NC5O:1024
> >>>>>>>           
> >>>>>>>               
> >>>> 5653A
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:55Z): naee TX (2009-08-23
> >>>>>>>           
> >>>>>>>               
> >>>> 18:55Z): 0E!
> >>>>     
> >>>>         
> >>>>>>> TX (2009-08-23 18:55Z): Hi NC5O, pse update
> >>>>>>>           
> >>>>>>>               
> >>>> your record6C550E"
> >>>>     
> >>>>         
> >>>>>>> TX (2009-08-23 18:55Z): TX (2009-08-23
> >>>>>>>           
> >>>>>>>               
> >>>> 18:55Z): A5730Es" A96A
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:55Z): ad RX (2009-08-23
> >>>>>>>           
> >>>>>>>               
> >>>> 18:55Z): nen
> >>>>     
> >>>>         
> >>>>>>> TX (2009-08-23 18:55Z): 0Ep" ED6A
> >>>>>>> RX (2009-08-23 18:55Z): ee tc
> >>>>>>> TX (2009-08-23 18:55Z): 0Ep" ED6A
> >>>>>>> RX (2009-08-23 18:55Z): eDe te TX (2009-08-23
> >>>>>>>           
> >>>>>>>               
> >>>> 18:55Z): 0Ep" ED6A
> >>>>     
> >>>>         
> >>>>>>> RX (2009-08-23 18:55Z): Stki
> >>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>> RX (2009-08-23 18:56Z): ee es
> >>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>> RX (2009-08-23 18:56Z): eoeTn
> >>>>>>> RX (2009-08-23 18:56Z): l'
> >>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>> RX (2009-08-23 18:56Z): attt o
> >>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>> RX (2009-08-23 18:56Z): nex p
> >>>>>>> TX (2009-08-23 18:56Z): 0Ep" ED6A
> >>>>>>>
> >>>>>>> So the position beacon was ok but during the
> >>>>>>>           
> >>>>>>>               
> >>>> connected session the server did not get any good frames
> >>>> from you.
> >>>>     
> >>>>         
> >>>>>>> I guess that could be due to conditions, local
> >>>>>>>           
> >>>>>>>               
> >>>> QRM or something else?
> >>>>     
> >>>>         
> >>>>>>> The mentioned fldigi problem is that complete
> >>>>>>>           
> >>>>>>>               
> >>>> frames are always sent to fldigi and it in turn keys the
> >>>> transmitter,
> >>>>     
> >>>>         
> >>>>>>> sends the frame and stops the transmission.
> >>>>>>>           
> >>>>>>>               
> >>>> Some have had a problem where fldigi stops the transmitter
> >>>> too soon,
> >>>>     
> >>>>         
> >>>>>>> so there is no local monitor and can not be
> >>>>>>>           
> >>>>>>>               
> >>>> any. We would have to receive what fldigi transmits for
> >>>> that. The easiest
> >>>>     
> >>>>         
> >>>>>>> way to indicate this issue is just to listen
> >>>>>>>           
> >>>>>>>               
> >>>> to the frames, if they sound cut (when compared to others)
> >>>> then they
> >>>>     
> >>>>         
> >>>>>>> probably are. But, this is not a general issue
> >>>>>>>           
> >>>>>>>               
> >>>> and it might not at all have anything to do with your
> >>>> connected session
> >>>>     
> >>>>         
> >>>>>>> above.
> >>>>>>>
> >>>>>>> 73 de Per, sm0rwo
> >>>>>>>
> >>>>>>> sön 2009-08-23 klockan 12:52 -0700 skrev
> >>>>>>>           
> >>>>>>>               
> >>>> Russell Blair:Well OK they are both empty, but if I done get
> >>>> a connect responce from the server to show me that I connect
> >>>> to the server then I cant up date the server, maybe WB5CON
> >>>> can look and his server log and see whats missing from my
> >>>> request for connection. Oh the listening is also grayed out
> >>>> on my gue interface. Is there some place where I can look
> >>>> and see what being sent during my requset for connection.
> >>>> Russell 1- Whoever said nothing is impossible never tried
> >>>> slamming a revolving door! 2- A government big enough to
> >>>> give you everything you want, is strong enough to take
> >>>> everything you have. - Thomas Jefferson " IN GOD WE TRUST "
> >>>> Russell Blair (NC5O) Skype-Russell.Blair Hell Field #
> >>>>     
> >>>>         
> >>>>>>> 300 DRCC #55 30m Dig-group #693 --- On Sun,
> >>>>>>>           
> >>>>>>>               
> >>>> 8/23/09, Per Crusefalk <
> >>>>     
> >>>>         
> >>>>>>> per@xxxxxxxxxxxx>
> >>>>>>>           
> >>>>>>>               
> >>>> wrote: > From: Per Crusefalk <per@xxxxxxxxxxxx>
> >>>>     
> >>>>         
> >>>>> Subject: [pskmail] Re: New PSKmail 0.3.7 downloaded.
> >>>>> To: pskmail@
> >>>>>       
> >>>>>           
> >>>>>>> freelists.org> Date: Sunday, August 23,
> >>>>>>>           
> >>>>>>>               
> >>>> 2009, 2:40 PM > Hi Russel, > >
> >>>>     
> >>>>         
> >>>>>>> They are both empty by default as extra
> >>>>>>>           
> >>>>>>>               
> >>>> characters are > mostly not > needed. I have heard
> >>>> stations that have their frames cut > short, some >
> >>>> frames just barely make it and others lack the EOT >
> >>>> character so I put > those fields there to be able to
> >>>> handle it just in case. >    
> >>>>     
> >>>>         
> >>>>>>>> 73 de Per, sm0rwo > > > sön
> >>>>>>>>             
> >>>>>>>>                 
> >>>> 2009-08-23 klockan 12:25 -0700 skrev   
> >>>>    
> >>>>     
> >>>>         
> >>>>>>> Russell Blair: > > Ok, well I did as you
> >>>>>>>           
> >>>>>>>               
> >>>> asked and I saw nothing on > WB5CON log, When I go the
> >>>> the Frame Postamble there is > nothing there as well as
> >>>> the Peramble. should ther be > something in there for me
> >>>> to put spaces in front of.? > > > > Russell >
> >>>>     
> >>>>         
> >>>>>>> 1- Whoever said nothing is impossible never
> >>>>>>>           
> >>>>>>>               
> >>>> tried > slamming a revolving door! >    
> >>>>     
> >>>>         
> >>>>>>>> 2- A government big enough to give you
> >>>>>>>>             
> >>>>>>>>                 
> >>>> everything you > want, is   
> >>>>    
> >>>>     
> >>>>         
> >>>>>>> strong enough to take everything you have.
> >>>>>>>           
> >>>>>>>               
> >>>>>> - Thomas Jefferson > >    
> >>>>>>         
> >>>>>>             
> >>>>>>>>> " IN GOD WE TRUST " > > >
> >>>>>>>>>               
> >>>>>>>>>                   
> >>>>> Russell Blair (NC5O) > > Skype-
> >>>>>       
> >>>>>           
> >>>>>>>>>      
> >>>>>>>>>               
> >>>>>>>>>                   
> >>>>    
> >>>>     
> >>>>         
> >>>>>>> Russell.Blair > > Hell Field #300 >
> >>>>>>>           
> >>>>>>>               
> >>>>> DRCC #55 > > 30m Dig-group #693    
> >>>>>       
> >>>>>           
> >>>>>>>>>>>>> --- On Sun, 8/23/09,
> >>>>>>>>>>>>>                       
> >>>>>>>>>>>>>                           
> >>>> Per Crusefalk <per@xxxxxxxxxxxx>
> >>>>     
> >>>>         
> >>>>>              
> >>>>>       
> >>>>>           
> >>>>    
> >>>>     
> >>>>         
> >>>>>>> wrote: > > > > > From: Per
> >>>>>>>           
> >>>>>>>               
> >>>> Crusefalk <per@xxxxxxxxxxxx>
> >>>>     
> >>>>         
> >>>>>>> Subject:
> >>>>>>> [pskmail] Re: New PSKmail 0.3.7 >
> >>>>>>>           
> >>>>>>>               
> >>>> downloaded. > > > To: pskmail@
> >>>>     
> >>>>         
> >>>>>>> freelists.org> > > Date: Sunday,
> >>>>>>>           
> >>>>>>>               
> >>>> August 23, 2009, 12:57 PM > > > Hi Russel, >
> >>>>     
> >>>>         
> >>>>>>>>> Can you try agn and look at the log
> >>>>>>>>>               
> >>>>>>>>>                   
> >>>> page at > WB5CON while > > > you are trying?
> >>>>     
> >>>>         
> >>>>>>> That page is here: http://
> >>>>>>> wb5con.homedns.org/index.shtml> > > I
> >>>>>>>           
> >>>>>>>               
> >>>> have heard a few stations (but I'm not saying > that IS
> >>>> the > > > problem) > > > where fldigi is
> >>>> not properly finishing the > frames, it stops > >
> >>>>     
> >>>>         
> >>>>> the tx too > > > soon.
> >>>>>       
> >>>>>           
> >>>>>>> If that is the case then add a few spaces >
> >>>>>>>           
> >>>>>>>               
> >>>> to "frame > > > postamble"
> >>>>     
> >>>>         
> >>>>>>> on > > > the modem tab of the
> >>>>>>>           
> >>>>>>>               
> >>>> preferences dialog. > > > > > > 73 de Per,
> >>>> sm0rwo > > > > > > > > > sön
> >>>> 2009-08-23 klockan 10:42 -0700 skrev Russell > Blair:
> >>>>     
> >>>>         
> >>>>>>>> I downloaded the new version 0.3.7 of
> >>>>>>>>             
> >>>>>>>>                 
> >>>>>>> PSKmail and been > > > trying to
> >>>>>>>           
> >>>>>>>               
> >>>> connect to WB5CON to update the server, > however I >
> >>>>     
> >>>>         
> >>>>>> cant seem to get connected, each time I try to
> >>>>>>         
> >>>>>>             
> >>>>> connect > > > WB5CON respondes back to me but
> >>>>>       
> >>>>>           
> >>>> I dont seem to > respond back > > > to him. I'm
> >>>> using the same setting as was in > 0.3.
> >>>>     
> >>>>         
> >>>>>>> 6 version. > > > Any Help. > >
> >>>>>>>           
> >>>>>>>               
> >>>>>>>>>> Russell > > > > 1-
> >>>>>>>>>>                 
> >>>>>>>>>>                     
> >>>> Whoever said nothing is impossible never > tried >
> >>>>     
> >>>>         
> >>>>>> slamming a revolving door! > > > > 2-
> >>>>>>         
> >>>>>>             
> >>>> A government big enough to give you > everything
> >>>> you    
> >>>>     
> >>>>         
> >>>>>>>>>> want, is strong enough to take
> >>>>>>>>>>                 
> >>>>>>>>>>                     
> >>>> everything you > have. > > > > -   
> >>>>        
> >>>>     
> >>>>         
> >>>>>>> Thomas Jefferson > > > > > >
> >>>>>>>           
> >>>>>>>               
> >>>>>> " IN GOD WE TRUST " > > > > > >
> >>>>>> Russell Blair (NC5O) > > > >
> >>>>>>         
> >>>>>>             
> >>>> Skype-Russell.Blair > > > > Hell Field #
> >>>>     
> >>>>         
> >>>>>>> 300 > > > > DRCC #55 > >
> >>>>>>>           
> >>>>>>>               
> >>>>>> 30m Dig-group #693 > > > > > >
> >>>>>>         
> >>>>>>             
> >>>>>>>      
> >>>>>>>           
> >>>>>>>               
> >>>>>>    
> >>>>>> ------------------------------------------------------------------------
> >>>>>>
> >>>>>>
> >>>>>> No virus found in this incoming message.
> >>>>>> Checked by AVG - www.avg.com Version: 8.5.409 /
> >>>>>>         
> >>>>>>             
> >>>> Virus Database: 270.13.65/2322 - Release Date: 08/23/09
> >>>> 18:03:00
> >>>>     
> >>>>         
> >>>>>>    
> >>>>>>         
> >>>>>>             
> >>>> ------------------------------------------------------------------------
> >>>>     
> >>>>         
> >>>>> No virus found in this incoming message.
> >>>>> Checked by AVG - www.avg.com Version: 8.5.409 / Virus
> >>>>>       
> >>>>>           
> >>>> Database: 270.13.65/2322 - Release Date: 08/23/09 18:03:00
> >>>>     
> >>>>         
> >>>>>    
> >>>>>       
> >>>>>           
> >>>>     
> >>>>         
> >>>       
> >>>   
> >>> ------------------------------------------------------------------------
> >>>
> >>>
> >>> No virus found in this incoming message.
> >>> Checked by AVG - www.avg.com 
> >>> Version: 8.5.409 / Virus Database: 270.13.65/2322 - Release Date: 
> >>> 08/23/09 18:03:00
> >>>
> >>>   
> >>>       
> >
> >   
> > ------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com 
> > Version: 8.5.409 / Virus Database: 270.13.65/2323 - Release Date: 08/24/09 
> > 06:05:00
> >
> >   
> 
> 

-- 
http://pa0r.blogspirit.com

Other related posts: