Re: [PCWorks] Internet connectivity puzzle
- From: Peter Kaulback <peter@xxxxxxxxxxxxxxxxx>
- To: pcworks@xxxxxxxxxxxxx
- Date: Sun, 18 Nov 2007 21:00:44 -0500
Yes, that is the protocol that should be removed.
It does cause flakiness in certain browsers and systems.
Peter Kaulback
Dale E. Heltzer wrote:
> Do you mean in the Properties for my Local Area Network, one of the
> entries is
> Microsoft TCP / IP Version 6
>
> ??
>
> Is *that what I should remove?
>
>
>
> -----Original Message-----
> From: pcworks-bounce@xxxxxxxxxxxxx [mailto:pcworks-bounce@xxxxxxxxxxxxx]
> On Behalf Of Peter Kaulback
> Sent: Sunday, November 18, 2007 10:37 AM
> To: pcworks@xxxxxxxxxxxxx
> Subject: Re: [PCWorks] Internet connectivity puzzle
>
> Dale, is IPV6 installed on this system? In "Networking" for your
> connection is there an entry for IPV6? If it is there then uninstall it.
>
> It is not needed for most purposes and if you need it in the future then
> you can install it again. Likely you won't though.
>
> Peter Kaulback
>
> Dale E. Heltzer wrote:
>
>> When I try to use Msie (V7) I frequently (but not *always) get a
>> message at the bottom of the screen "connecting to site 1.0.0.0" after
>>
>
>
>> which I get the message that Internet Explorer "cannot display the web
>>
> page."
>
>> I am using XP Pro, ZoneAlarm Pro, Norton AV 2006 I have Windows
>> firewall turned off.
>>
>> Any suggestions?
>>
>> TIA
>
=========================
The list's FAQ's can be seen by sending an email to
PCWorks-request@xxxxxxxxxxxxx with FAQ in the subject line.
To unsubscribe, subscribe, set Digest or Vacation to on or off, go to
//www.freelists.org/list/pcworks . You can also send an email to
PCWorks-request@xxxxxxxxxxxxx with Unsubscribe in the subject line. Your
member list settings can be found at
//www.freelists.org/cgi-bin/lsg2.cgi/l=pcworks . Once logged in, you have
access to numerous other email options.
The list archives are located at //www.freelists.org/archives/pcworks/ .
All email posted to the list will be placed there in the event anyone needs to
look for previous posts.
Other related posts:
