Warren, I install hard flooring for a living, so I know what you just went through. It's good to hear that you now have your own compressor, just wait until the neighbors find out and recruit you to work on their floors. lol I have a very large stand up compressor that we got from an auto shop when they went out of business. Since it's non-movable, I run a line over to my workbench in the garage for this exact purpose. To use yours for cleaning out a tower, desktop or laptop, you really don't need a whole lot of pressure (try 20-30 lbs at first and adjust from there). The more important part of the equipment is the nozzle you choose. Ideally, you'll want an attachment that will both pinpoint the flow of air (>) and also include a trigger that lets you use very short, targeted blasts wherever needed. Also, it's extremely important that there be an inline moisture trap (see thru glass jar) included on the main line coming from the compressor so that any moisture buildup inside the tank doesn't come spraying out of the nozzle onto your delicate computer electronics. Depending on the size of your compressor, this trap will also make it easier to see when it's time to empty excess water out of the tank. Peace, G "The only dumb questions are the ones that are never asked" ----- Original Message ----- From: "Warren Standifird" <wstandifird@xxxxxxxxxxx> To: <pctechtalk@xxxxxxxxxxxxx> Sent: Thursday, June 12, 2008 12:15 PM Subject: -=PCTechTalk=- The Big Blow Out > Just got through installing a hardwood floor in the living room. For this > project I needed a nailer and an air compressor. We decided to rent the > nailer but to buy the air compressor since the cost would be about the > same and it can be put to other uses later on. > > Since my computer seems to be very suceptable to heat, I find that I need > to blow out the dust about every two to three months. It occured to me > that since I now have this air compressor anyway I might as well use it > instead of the compressed air cans to blow out the dust. > > Just checking to be sure that there is not any problems with this that I > may have overlooked and wondering what preassure setting would be > recomended. > > Thanks so much, > > Warren --------------------------------------------------------------- Please remember to trim your replies (including this sentence and everything below it) and adjust the subject line as necessary. To unsubscribe or change your email settings: //www.freelists.org/webpage/pctechtalk To access our Archives: http://groups.yahoo.com/group/PCTechTalk/messages/ //www.freelists.org/archives/pctechtalk/ To contact only the PCTT Mod Squad, write to: pctechtalk-moderators@xxxxxxxxxxxxx ---------------------------------------------------------------