1/2" Whit. Would you like a copy of the page. Cheers Peter R.L. Roebuck wrote: > http://freespace.virgin.net/simplex.steam/simplexprobs.htm#3.Missing%20details%20from%20the%20drawings. > > ...says the regulator details missing from the drawings AND THE BOOK are > in... > > Model Engineer 5th July 1968 Page 650 > > I don't have it myself, but maybe some other soul out there will have it > and be willing to send you a copy. > > Alternatively, if you can wait a week or so, I can look it up for you when > I'm next at the library as they have all the issues there. > > Yours, > > Rich. > > On Wed, 30 Aug 2006, R.L. Roebuck wrote: > > >>Hi there Keith, >> >>Do you have the book to hand? >> >>If not, I have a copy at home and could check it out tonight to see if it's >>in there. >> >>Also, there is the web site... >> >>http://freespace.virgin.net/simplex.steam/index.htm >> >>...and Alan's page... >> >>http://www.alanstepney.info/page45.html >> >>...which it would be good to keep an eye on if you aren't already, just so >>that you don't waste time building bits twice, that people have already >>spotted the plans are wrong for. They may list the regulator thread >>somewhere. >> >>Yours, >> >> >>Rich. >> >>On Wed, 30 Aug 2006, Gmx22@xxxxxxx wrote: >> >> >>>Hi all just a quick one. Has anybody got any idea what the thread is on >>>simplex regulator, it says its left hand but there are no other dimensions >>>on the >>>plans, Which i have come to expect now! If i have the thread size I think >>>I >>>could work the rest out but if anyone has a full drawing or know where I >>>can >>>get some from i would be grateful, >>>yours keith. >>> >>> >>>MODEL ENGINEERING DISCUSSION LIST. >>> >>>To UNSUBSCRIBE from this list, send a blank email to, >>>modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject >>>line. >>> >> > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.