Hi there Cliff, That is somewhat curious/interesting. I wonder how the clubs view tests done by people such as this: http://www.maidstone-engineering.com/index.php?route=product/category&path=6 55 pounds of less. All the best, Rich. On Wed, 9 Jan 2013, Clifton wrote: > Hi All, > > Gave up on having any of my boilers tested by either the Northern or > Southern Feds when one of their inspectors refused to accept and made a > right song and dance about it on a three month old boiler certificate on an > brand new boiler/loco because my club was not in the federation. > My club was around & doing boiler tests long before the federations were > dreamed up & my boiler inspector was qualified which is more than I can say > for a lot of them who only get the job because they stick their hand up at > the AGM. Half the federation inspectors I have met have never heard of, or > seen dezincification for instance. > > > Clif > ----- Original Message ----- > From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx> > To: <modeleng@xxxxxxxxxxxxx> > Sent: Wednesday, January 09, 2013 9:22 AM > Subject: [modeleng] Re: Boiler markings > > >> Hi Rich., >> >> It is a requirement that all boilers tested by the Northern Fed. (The >> Southern now work to the same rules) have a unique number. The number >> consists of three parts, first a number identifying the club which the >> inspector is a member, then the Safe Working Pressure in psi then a unique >> number allocated by the boiler inspector. >> >> Cheers, >> >> Barrie >> >> -----Original Message----- >> From: R.L. Roebuck >> Sent: Wednesday, January 09, 2013 12:26 AM >> To: modeleng@xxxxxxxxxxxxx >> Subject: [modeleng] Boiler markings >> >> Dear All, >> >> I wonder if anyone could help out with a question regarding UK Southern >> Federation Club boiler markings: >> >> Am I right in thinking that all boilers tested need to have identifying >> markings now so that boiler certificates can be matched up to boilers, or >> is this not a requirement? >> >> If it s requirement, roughly how long has this been a requirement? >> >> I'm just trying to do a bit of 'detective' work in order to try to reunite >> a boiler with it's long lost boiler certification details, which has paid >> off a couple of times in the past, so thought I'd give it another go!!! >> >> All the best, >> >> >> Rich. >> >> >> MODEL ENGINEERING DISCUSSION LIST. >> >> To UNSUBSCRIBE from this list, send a blank email to, >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject >> line. >> >> MODEL ENGINEERING DISCUSSION LIST. >> >> To UNSUBSCRIBE from this list, send a blank email to, >> modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject >> line. >> > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.