Hi All, Gave up on having any of my boilers tested by either the Northern or Southern Feds when one of their inspectors refused to accept and made a right song and dance about it on a three month old boiler certificate on an brand new boiler/loco because my club was not in the federation. My club was around & doing boiler tests long before the federations were dreamed up & my boiler inspector was qualified which is more than I can say for a lot of them who only get the job because they stick their hand up at the AGM. Half the federation inspectors I have met have never heard of, or seen dezincification for instance. Clif ----- Original Message ----- From: "Barrie Purslow" <bpduo@xxxxxxxxxxxxx> To: <modeleng@xxxxxxxxxxxxx> Sent: Wednesday, January 09, 2013 9:22 AM Subject: [modeleng] Re: Boiler markings > Hi Rich., > > It is a requirement that all boilers tested by the Northern Fed. (The > Southern now work to the same rules) have a unique number. The number > consists of three parts, first a number identifying the club which the > inspector is a member, then the Safe Working Pressure in psi then a unique > number allocated by the boiler inspector. > > Cheers, > > Barrie > > -----Original Message----- > From: R.L. Roebuck > Sent: Wednesday, January 09, 2013 12:26 AM > To: modeleng@xxxxxxxxxxxxx > Subject: [modeleng] Boiler markings > > Dear All, > > I wonder if anyone could help out with a question regarding UK Southern > Federation Club boiler markings: > > Am I right in thinking that all boilers tested need to have identifying > markings now so that boiler certificates can be matched up to boilers, or > is this not a requirement? > > If it s requirement, roughly how long has this been a requirement? > > I'm just trying to do a bit of 'detective' work in order to try to reunite > a boiler with it's long lost boiler certification details, which has paid > off a couple of times in the past, so thought I'd give it another go!!! > > All the best, > > > Rich. > > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > > MODEL ENGINEERING DISCUSSION LIST. > > To UNSUBSCRIBE from this list, send a blank email to, > modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject > line. > MODEL ENGINEERING DISCUSSION LIST. To UNSUBSCRIBE from this list, send a blank email to, modeleng-request@xxxxxxxxxxxxx with the word "unsubscribe" in the subject line.