Re: [MoAccess] Fw: all questions in one mail
- From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Wed, 12 Sep 2007 12:31:13 -0400
I don't know. I've been busy with the scripts for John's editors, trying to be
sure they're ready for when the editors come out next week. At the end of next
week, I'm flying out to Colorado for a week to setup a studio for a client.
Bryan
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On
Behalf Of james murphy
Sent: Wednesday, September 12, 2007 10:45 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Fw: all questions in one mail
Bryan question:
----- Original Message -----
From: james murphy <mailto:maestro_22@xxxxxxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 9:48 AM
Subject: Re: [MoAccess] all questions in one mail
Hi bryan was you still going to put out the info on all the buttons knobs and
jacks for the XS?????
----- Original Message -----
From: Bryan Smart <mailto:bryansmart@xxxxxxxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 9:25 AM
Subject: Re: [MoAccess] all questions in one mail
Yes; the single part control button is at the extreme top left.
Bryan
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Lütteke
Sent: Wednesday, September 12, 2007 1:14 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] all questions in one mail
sorry, what is the singlepart control?
is it the bar on the loft side on top?
where I start the controlfunctionsscreen?
Regards, Robert.
----- Original Message -----
From: Bryan Smart <mailto:bryansmart@xxxxxxxxxxxxxx>
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 1:02 AM
Subject: Re: [MoAccess] all questions in one mail
TO store a pattern or song, press store, enter, then yes.
TO delete a pattern or song, press job, F6 go to the 4th job
from the top, press enter, then yes. You need to switch away from the current
pattern and come back before the patter or song will seem to be empty.
To change the tempo, Hold down the single-part control button
for 2 seconds, press the single part control button twice, then use the last
knob on the right.
Bryan
________________________________
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Lütteke
Sent: Tuesday, September 11, 2007 2:13 PM
To: Motif Access
Subject: [MoAccess] all questions in one mail
Hi!
How to do the following things.
1. Can I store my patterns?
2. How to deleete a compleet pattern?
3. How to change the tempo? my temp stands on auto and I can't
change it.
OK.
perhaps someone could help me.
All the questions are for the XS.
Other related posts:
