Re: [MoAccess] Fw: all questions in one mail
- From: Robert Lütteke <robert.luetteke@xxxxxx>
- To: <MoAccess@xxxxxxxxxxxxx>
- Date: Wed, 12 Sep 2007 19:48:02 +0200
are you successful with skripting for John?
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 6:31 PM
Subject: Re: [MoAccess] Fw: all questions in one mail
I don't know. I've been busy with the scripts for John's editors, trying to
be sure they're ready for when the editors come out next week. At the end of
next week, I'm flying out to Colorado for a week to setup a studio for a client.
Bryan
------------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx] On
Behalf Of james murphy
Sent: Wednesday, September 12, 2007 10:45 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: [MoAccess] Fw: all questions in one mail
Bryan question:
----- Original Message -----
From: james murphy
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 9:48 AM
Subject: Re: [MoAccess] all questions in one mail
Hi bryan was you still going to put out the info on all the buttons knobs and
jacks for the XS?????
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 9:25 AM
Subject: Re: [MoAccess] all questions in one mail
Yes; the single part control button is at the extreme top left.
Bryan
----------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx [mailto:moaccess-bounce@xxxxxxxxxxxxx]
On Behalf Of Robert Lütteke
Sent: Wednesday, September 12, 2007 1:14 AM
To: MoAccess@xxxxxxxxxxxxx
Subject: Re: [MoAccess] all questions in one mail
sorry, what is the singlepart control?
is it the bar on the loft side on top?
where I start the controlfunctionsscreen?
Regards, Robert.
----- Original Message -----
From: Bryan Smart
To: MoAccess@xxxxxxxxxxxxx
Sent: Wednesday, September 12, 2007 1:02 AM
Subject: Re: [MoAccess] all questions in one mail
TO store a pattern or song, press store, enter, then yes.
TO delete a pattern or song, press job, F6 go to the 4th job from the
top, press enter, then yes. You need to switch away from the current pattern
and come back before the patter or song will seem to be empty.
To change the tempo, Hold down the single-part control button for 2
seconds, press the single part control button twice, then use the last knob on
the right.
Bryan
--------------------------------------------------------------------------
From: moaccess-bounce@xxxxxxxxxxxxx
[mailto:moaccess-bounce@xxxxxxxxxxxxx] On Behalf Of Robert Lütteke
Sent: Tuesday, September 11, 2007 2:13 PM
To: Motif Access
Subject: [MoAccess] all questions in one mail
Hi!
How to do the following things.
1. Can I store my patterns?
2. How to deleete a compleet pattern?
3. How to change the tempo? my temp stands on auto and I can't change it.
OK.
perhaps someone could help me.
All the questions are for the XS.
Other related posts:
