[Linuxtrent] Condivisione connessione a internet

  • From: Nivox <zito.andrea@xxxxxxxxxx>
  • To: linuxtrent@xxxxxxxxxxxxx
  • Date: Sat, 6 Dec 2003 21:35:40 +0100

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Incomincio ad avere dei complessi di inferiorità... Nonostante
su tutti gli howto che ho trovato la fanno semplicissima, non riesco a 
impostare il NAT in modo da condividere la connessione a internet.

Allora vediamo di decrivere la situazione:

eth0  192.168.0.1  Collegata alla lan
eth1  10.0.0.1 Collegata al modem ethernet (10.0.0.138)

Il modem si connette a internet tramite il protocollo pptp.
Io per fare la condivisione ho dat questo comando:

$iptables -t nat -A POSTROUTING -o ppp0 -j MASQUERADE


Dopodichè ho dato sui client:

$route add default gw 192.168.0.1

e ho messo all'interno di resolv.conf:

$nameserver 192.168.0.1

e successivamente i DNS del mio provider.
Nonostante tutto questo non funziona niente... La connessione
non viene condivisa. Se provo a pingare rimane li e non fa niente.

Per completezza vi allego anche il mio ifconfig:

##########################################
eth0      Link encap:Ethernet  HWaddr 00:E0:4C:55:37:B9
          inet addr:192.168.0.1  Bcast:192.168.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:281458 errors:0 dropped:0 overruns:0 frame:0
          TX packets:547618 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:17849306 (17.0 MiB)  TX bytes:811326699 (773.7 MiB)
          Interrupt:5 Base address:0xb000

eth1      Link encap:Ethernet  HWaddr 00:40:F4:5C:25:7B
          inet addr:10.0.0.1  Bcast:10.0.0.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:2038 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1907 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:100
          RX bytes:321037 (313.5 KiB)  TX bytes:202164 (197.4 KiB)
          Interrupt:10 Base address:0xd000

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:136 errors:0 dropped:0 overruns:0 frame:0
          TX packets:136 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:8768 (8.5 KiB)  TX bytes:8768 (8.5 KiB)

ppp0      Link encap:Point-to-Point Protocol
          inet addr:217.133.215.29  P-t-P:195.130.232.106  
Mask:255.255.255.255
          UP POINTOPOINT RUNNING NOARP MULTICAST  MTU:1492  Metric:1
          RX packets:1333 errors:0 dropped:0 overruns:0 frame:0
          TX packets:1352 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:3
          RX bytes:207973 (203.0 KiB)  TX bytes:89266 (87.1 KiB)

#######################################

Se ci fosse qualche buon anima compassionevole che mi sapesse dire cosa stò
sbagliando mi farebbe un grosso favore... Stò impazzendo per far funzionare
sta cosa.


Ciao un grazie anticipato e la promessa di una birra a chiunque mi sappia
aiutare.

- -- 
Nivox

Linux Registered User #290686   
Powered by: Debian Sid
JABBER: nivox@xxxxxxxxxxxxxxx
GPG Key ID: 0xC6A50D8D (info: www.gnupg.org)
GPG Keyserver: http://www.keyserver.net

La donna è un errata implementazione di un architettura corretta (Diaolin)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.3 (GNU/Linux)

iD8DBQE/0j2cfhOftsalDY0RAu9uAJsE2TzLN8qeE/ZbwZw8k4uIe4QytACeINhm
O/+UZuUmLnAMtyjWIemutLo=
=BaBb
-----END PGP SIGNATURE-----

--
Per iscriversi  (o disiscriversi), basta spedire un  messaggio con OGGETTO
"subscribe" (o "unsubscribe") a mailto:linuxtrent-request@xxxxxxxxxxxxx


Other related posts: