Sorry Keith I was not precise. I ment that the code/configuration should be changed so that the user is directed to the list/website. I was not commenting on your particular bug report. :) thanks, Mesar On Fri 06/06/14,15:38, Keith Creasy wrote: > Well, I agree and strictly speaking I did send it to the list and not to John > personally. He's just the most knowledgable person I know when it comes to > this stuff. > > > Thanks for your help with this, all of you. > > > Keith > > -----Original Message----- > From: liblouis-liblouisxml-bounce@xxxxxxxxxxxxx > [mailto:liblouis-liblouisxml-bounce@xxxxxxxxxxxxx] On Behalf Of Mesar Hameed > Sent: Friday, June 06, 2014 11:27 AM > To: liblouis-liblouisxml@xxxxxxxxxxxxx > Subject: [liblouis-liblouisxml] Re: Why is there an error in this test run? > > Hi, > Its probably best if the user is redirected to the mailinglist and to the > website rather than a particular individual. > > thanks, > Mesar > On Fri 06/06/14,17:24, Bert Frees wrote: > > The difference between the output and the expected result appears to > > be only whitespace. Either the expected result should be adjusted or > > we should have a more advanced output comparing that ignores > > whitespace at the end of lines (right now it is just using diff). > > > > For the record, I'm not the responsible person either, you knew that > > :) I'm only trying to help out because I wrote those tests but I have > > my hands full with liblouis. > > > > Bert > > > > John J. Boyer writes: > > > > > Keith, > > > > > > This looks good as far as the output of the test run is concerned. I > > > don't know why failures are expected. It's something for Bert to > > > explain. Shouldn't he be the one to receive bug reports? I'm no > > > longer the appropriate person. > > > > > > John > > > > > > On Fri, Jun 06, 2014 at 02:57:08PM +0000, Keith Creasy wrote: > > >> John, I did run the liblouisutdml tests: > > >> > > >> Tests run: 13, Failures: 1, Expected failures: 7, Errors: 0 > > >> > > >> FAIL: run_test_suite.sh > > >> ============================================= > > >> 1 of 3 tests failed > > >> Please report to john.boyer@xxxxxxxxxxxxxxxxx > > >> > > >> > > >> Why does it expect 7 failures? > > >> > > >> > > >> Here is the entire output: > > >> > > >> Making check in gnulib > > >> make[1]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/gnulib' > > >> make check-recursive > > >> make[2]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/gnulib' > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/gnulib' > > >> make[3]: Nothing to be done for `check-am'. > > >> make[3]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/gnulib' > > >> make[2]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/gnulib' > > >> make[1]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/gnulib' > > >> Making check in doc > > >> make[1]: Entering directory `/home/kcreasy/workspace/liblouisutdml/doc' > > >> make[1]: Nothing to be done for `check'. > > >> make[1]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/doc' > > >> Making check in lbu_files > > >> make[1]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/lbu_files' > > >> make[1]: Nothing to be done for `check'. > > >> make[1]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/lbu_files' > > >> Making check in liblouisutdml > > >> make[1]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/liblouisutdml' > > >> make[1]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/liblouisutdml' > > >> Making check in tests > > >> make[1]: Entering directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> Making check in test_suite > > >> make[2]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite' > > >> Making check in test_01 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_01' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_01' > > >> Making check in test_02 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_02' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_02' > > >> Making check in test_03 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_03' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_03' > > >> Making check in test_04 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_04' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_04' > > >> Making check in test_05 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_05' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_05' > > >> Making check in test_06 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_06' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_06' > > >> Making check in test_07 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_07' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_07' > > >> Making check in test_08 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_08' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_08' > > >> Making check in test_09 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_09' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_09' > > >> Making check in test_10 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_10' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_10' > > >> Making check in test_11 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_11' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_11' > > >> Making check in test_12 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_12' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_12' > > >> Making check in test_13 > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_13' > > >> make[3]: Nothing to be done for `check'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite/test_13' > > >> make[3]: Entering directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite' > > >> make[3]: Nothing to be done for `check-am'. > > >> make[3]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite' > > >> make[2]: Leaving directory > > >> `/home/kcreasy/workspace/liblouisutdml/tests/test_suite' > > >> make[2]: Entering directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> make testTranslateString tripleTrans \ > > >> run_test_suite.sh > > >> make[3]: Entering directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> make[3]: `testTranslateString' is up to date. > > >> make[3]: `tripleTrans' is up to date. > > >> make[3]: Nothing to be done for `run_test_suite.sh'. > > >> make[3]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> make check-TESTS > > >> make[3]: Entering directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> XFAIL: testTranslateString > > >> PASS: tripleTrans > > >> ------------------------------------------------------------------- > > >> ------------- > > >> TESTS > > >> ------------------------------------------------------------------- > > >> ------------- > > >> Running test_01... > > >> Testing pagenum, runninghead and footer semantic actions > > >> \033[1m\033[91mFAIL\033[0m\033[0m Running test_02... > > >> Testing footer when some text immediately precedes the footer element > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> Running test_03... > > >> footer bug > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> Running test_04... > > >> Testing prehyphenation > > >> \033[1m\033[92mPASS\033[0m\033[0m Running test_05... > > >> Testing printPageNumberRange option with printPageNumberAt=bottom > > >> \033[1m\033[92mPASS\033[0m\033[0m Running test_06... > > >> Testing printPageNumberRange option with printPageNumberAt=top > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> Running test_07... > > >> Testing orphanControl > > >> \033[1m\033[92mPASS\033[0m\033[0m Running test_08... > > >> Testing nested orphanControl. Outer orphanControl assertion should > > >> not be > > >> dropped when inner orphanControl is encountered. > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> Running test_09... > > >> Testing hyphenation > > >> \033[1m\033[92mPASS\033[0m\033[0m Running test_10... > > >> Testing negative firstLineIndent > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> Running test_11... > > >> Testing braille page numbering table (pageNumberTable) > > >> \033[1m\033[92mPASS\033[0m\033[0m Running test_12... > > >> Testing whitespace-only text-node in mixed content. > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> Running test_13... > > >> Testing printPageNumberRange when a page break in print happens right > > >> before > > >> a page break in braille (fails when printPageNumberAt=bottom) > > >> \033[1m\033[93mXFAIL\033[0m\033[0m > > >> > > >> Summary: > > >> -------- > > >> Tests run: 13, Failures: 1, Expected failures: 7, Errors: 0 > > >> > > >> FAIL: run_test_suite.sh > > >> ============================================= > > >> 1 of 3 tests failed > > >> Please report to john.boyer@xxxxxxxxxxxxxxxxx > > >> ============================================= > > >> make[3]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> make[2]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> make[1]: Leaving directory `/home/kcreasy/workspace/liblouisutdml/tests' > > >> Keith > > >> > > >> > > >> -----Original Message----- > > >> From: liblouis-liblouisxml-bounce@xxxxxxxxxxxxx > > >> [mailto:liblouis-liblouisxml-bounce@xxxxxxxxxxxxx] On Behalf Of > > >> John J. Boyer > > >> Sent: Friday, June 06, 2014 5:30 AM > > >> To: liblouis-liblouisxml@xxxxxxxxxxxxx > > >> Subject: [liblouis-liblouisxml] Re: Why is there an error in this test > > >> run? > > >> > > >> Bert, > > >> > > >> Thanks. We'll be adding some tests to check UTDML . > > >> > > >> John > > >> > > >> On Fri, Jun 06, 2014 at 11:13:32AM +0200, Bert Frees wrote: > > >> > Keith and John, > > >> > > > >> > There was a bug in the script indeed when run by itself and not > > >> > through `make check`. I fixed that bug now, but it doesn't matter > > >> > really. The script is supposed to be run with make check anyway > > >> > because make takes care of setting LD_LIBRARY_PATH etc. > > >> > > > >> > You may also consider setting the `colors` var in the script to false. > > >> > It is merely a visual help for myself, but I noticed from your > > >> > emails that it produces garbage in your shell. > > >> > > > >> > Thanks, > > >> > Bert > > >> > > > >> > > > >> > Bert Frees writes: > > >> > > > >> > > This used to work. Haven't used it for a while. Let me check what's > > >> > > wrong. > > >> > > > > >> > > Bert > > >> > > > > >> > > Keith Creasy writes: > > >> > > > > >> > >> Yes, this is what I found also. Thanks. > > >> > >> > > >> > >> > > >> > >> -----Original Message----- > > >> > >> From: liblouis-liblouisxml-bounce@xxxxxxxxxxxxx > > >> > >> [mailto:liblouis-liblouisxml-bounce@xxxxxxxxxxxxx] On Behalf > > >> > >> Of John J. Boyer > > >> > >> Sent: Thursday, June 05, 2014 10:56 AM > > >> > >> To: liblouis-liblouisxml@xxxxxxxxxxxxx > > >> > >> Subject: [liblouis-liblouisxml] Why is there an error in this test > > >> > >> run? > > >> > >> > > >> > >> Below is a typescript of running the tests in liblouisutdml. There > > >> > >> seems to be a problem in finding things. > > >> > >> > > >> > >> Script started on Thu 05 Jun 2014 09:48:57 AM CDT > > >> > >> $31:3>./run_test_suite.sh > > >> > >> -------------------------------------------------------------- > > >> > >> ----- > > >> > >> ------------- > > >> > >> TESTS > > >> > >> -------------------------------------------------------------- > > >> > >> ----- > > >> > >> ------------- > > >> > >> ./run_test_suite.sh: 49: cd: can't cd to /test_suite/test_* Running > > >> > >> test_*... > > >> > >> Can't find configuration file 'styles.cfg' > > >> > >> Can't open input file input.xml. > > >> > >> > > >> > >> [1m[91mERROR[0m[0m > > >> > >> > > >> > >> Summary: > > >> > >> -------- > > >> > >> Tests run: 1, Failures: 0, Expected failures: 0, Errors: 1 > > >> > >> > > >> > >> $31:3>exit > > >> > >> exit > > >> > >> > > >> > >> Script done on Thu 05 Jun 2014 09:49:48 AM CDT > > >> > >> > > >> > >> John > > >> > For a description of the software, to download it and links to > > >> > project pages go to http://www.abilitiessoft.com > > >> > > >> -- > > >> John J. Boyer; President, Chief Software Developer Abilitiessoft, Inc. > > >> http://www.abilitiessoft.com > > >> Madison, Wisconsin USA > > >> Developing software for people with disabilities > > >> > > >> For a description of the software, to download it and links to > > >> project pages go to http://www.abilitiessoft.com For a description > > >> of the software, to download it and links to project pages go to > > >> http://www.abilitiessoft.com > > > > For a description of the software, to download it and links to project > > pages go to http://www.abilitiessoft.com > For a description of the software, to download it and links to > project pages go to http://www.abilitiessoft.com
Attachment:
signature.asc
Description: Digital signature