Carolyn, How much memory do you have on the machine you use at work where you need to switch between JFW and WE? The fact that this happens after you have the machine on for quite awhile suggests you might not have enough memory, or if you do have enough memory to start out with, you may have too many other programs running leaving you with not enough resources. Unfortunately, not all programs relinquish memory when you close them, so over time you can run out of needed memory. If you have less than 512 MB of RAM, I would suggest you have the machine upgraded at least to that, preferably 1024 MB of RAM if you are going to do lots of switching back and forth. Hope that helps. Bill Powers -- To post a message to the list, send it to jfw@xxxxxxxxxxxxx To unsubscribe from this mailing list, send a message to jfw-request@xxxxxxxxxxxxx with the word unsubscribe in the subject line. Archives located at: //www.freelists.org/archives/jfw If you have any concerns about the list, post received from the list, or the way the list is being run, do not post them to the list. Rather contact the list owner at jfw-admins@xxxxxxxxxxxxxx