[jawsscripts] Re: JAWS FindColors Function in IE 10
- From: "Bissett, Tom" <tom.bissett@xxxxxxx>
- To: "jawsscripts@xxxxxxxxxxxxx" <jawsscripts@xxxxxxxxxxxxx>
- Date: Thu, 23 May 2013 09:03:48 -0400
You get the black on black when the virtual cursor is active.
Tom Bisset
-----Original Message-----
From: jawsscripts-bounce@xxxxxxxxxxxxx
[mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Geoff Chapman
Sent: May 22, 2013 8:01 PM
To: jawsscripts@xxxxxxxxxxxxx
Subject: [jawsscripts] Re: JAWS FindColors Function in IE 10
I'm only chiming in here with a way less informed view of everything going on,
so take what I say with x grains of salt, but it sounds upon cursory reading
suspiciously like horrible jaws video driver anomalies again, but maybe somehow
in particular relation to virtual stuff.
So the getting stuck issue is one thing to think about, definitely, and I'm not
belittling trying to solve that one, (have you tried invisible cursor to do the
FindColors?) But, the fact that manually your getting a "black on black"
response when using jaws cursor to examine text, seems to me to pretty soundly
point to a substantial and more primary problem right there to attempt to solve
first!
I've seen situations/versions of jaws where routing jaws cursor to virtual PC,
just fails miserably, machine bonks, (indicating some kind of awareness of it's
failure though,) and jaws cursor just ends up in either the bottom status bar
or top, etc.
and other situations where it kinda works, and puts one in the vicinity of
where virtual pc focus is, but not exactly. and then other sitches where it has
worked, and I've never been able to get to the real bottom of it exactly ever!
I've also seen that issue before, quite a while ago now, which they did fix in
jaws, of the black on black being reported in IE, I think with jaws cursor, but
that was some time ago in jaws land now.
Rushing to get to a lesson but have you tried doing something reeeeally crude
like using AltShiftDownArrows in your script to force it out of that situation,
and then somehow doing a color search from that position down?
Although as I say, if your attributes are not even reliably being reported
manually when you get the jaws cursor on your text, that's the major issue to
resolve first I'd say.
Also have you messed with invisible cursor before activating FindColors? or is
it hardwired to use the jaws cursor always?
----- Original Message -----
From: "John P. Thomas" <johnt@xxxxxxxxxxxx>
To: <jawsscripts@xxxxxxxxxxxxx>
Sent: Thursday, May 23, 2013 2:05 AM
Subject: [jawsscripts] Re: JAWS FindColors Function in IE 10
> Hi Paul,
>
> Thank you for the scripts. They are instructive. The first one correctly
> sets the color variable. The second one fails to find the color for me.
> The problem seems to be that the JAWSCursor gets stuck in the area of the
> menu bar of IE10. Once it gets stuck there I can’t move it unless I AltTab
> away to another application and then AltTab back again. I have tried the
> RouteJAWSToPC function and the MoveToWindow functions without success. I
> have written some test scripts to monitor the window handles and cursor
> location of the PC and the JAWS cursor as the script runs, and I find that
> the JAWSCursor probably gets stuck as soon as the Find Color Function is
> run, so that it never has the chance to search for the color. The
> JAWSCursor is getting stuck on the menu bar, which has a different window
> handle than the one where the PCCursor is located. If I turn off all IE10
> tool bars and maximize the window, then the JAWSCursor still gets trapped
> in the same location where the tool bar
> would have been located if it was visible, however, the window handle is
> then the same as the original window handle that was used at the beginning
> of the color search.
>
> I have also tried your script and my test script on other IE10 webpages.
> The JAWSCursor doesn’t seem to get stuck on all of them, but the Find
> Colors function is also not successful. I am not able to get the
> RouteJAWSToPC function to work successfully on any IE10 webpages. Maybe
> this is normal since the virtual cursor is being used and maybe one really
> can’t route the JAWSCursor.
>
> I also noticed that if I use the SayColor script key INSERT+5 with the
> JAWSCursor, it always says black on black regardless of the text it is
> pointing to. It only identifies the color when the PCCursor is active.
> Since the FindColors function uses the JAWS cursor to do the search, then
> maybe this is why the FindColors functions fails for me.
>
> Do you or any of the other scripters have other thoughts about this? Is
> there any way to regain control over the JAWSCursor after it gets stuck?
>
> Thanks for your help! I have learned quite a bit from your examples.
>
> John
>
>
>
> -----Original Message-----
> From: jawsscripts-bounce@xxxxxxxxxxxxx
> [mailto:jawsscripts-bounce@xxxxxxxxxxxxx] On Behalf Of Paul Magill
> Sent: Saturday, May 18, 2013 6:54 AM
> To: jawsscripts@xxxxxxxxxxxxx
> Subject: [jawsscripts] Re: JAWS FindColors Function in IE 10
>
> Hi John and all,
>
> The below script, FindAndReadColoredText, successfully finds colored text
> using Jaws 13, under Windows XP with I E 8.
>
> ** Note 1, it only works when using the Jaws cursor, and when the target
> text is visually on the screen.
> Note 2, It failed when the last parameter of FindColors was set to 1, as
> in your first find example. I dont know why that should be, as the last
> parameter only specifies the extent of the window to search, & as far as I
> know, the I E window is all one window.
>
> The first script, is used to set the global to the text color to find.
>
> I hope this is of some help.
>
> Regards,
> Paul from Australia.
>
>
> Script SetColorToFind ()
> ; obtains the color to find
>
> VAR
>
> INT Dummy,
>
> STRING ApproxColorName
>
>
>
> LET G_TextColor = GetColorText () ; gets the color of the forground text
> at the location of the active cursor
>
> LET ApproxColorName = GetColorName (GetColorApproximation (G_TextColor,
> Dummy))
>
>
>
> SayUsingVoice (VCTX_Message, ApproxColorName + ", saved as search color",
> OT_No_Disable)
>
> ; SayInteger (G_TextColor)
>
> EndScript
>
>
>
>
>
> Script FindAndReadColoredText ()
>
> VAR
>
> INT Dummy,
>
> STRING ApproxColorName
>
>
>
> LET ApproxColorName = GetColorName (GetColorApproximation (G_TextColor,
> Dummy))
>
> JAWSCursor ()
>
> IF FindColors (G_TextColor, IgnoreColor , S_Top, 0) THEN
>
> Say (GetColorField (), OT_No_Disable) ; says the colored text
>
> ELSE ; no text of that color found
>
> SayUsingVoice (VCTX_Message, ApproxColorName + " text not found",
> OT_No_Disable)
>
> ENDIF ; search for color successful or not
>
> EndScript
>
>
>
> ----- Original Message -----
> From: "John P. Thomas" <johnt@xxxxxxxxxxxx>
>
>> Hi scripters,
>>
>> I tried to get the FindColors function to work in an Internet Explorer
>> window about 5 years ago, and gave up, because I couldn't get it to work
>> for me. I found some other solutions to my scripting tasks and just
>> assumed the function was broken. So here I am again looking at the same
>> function once again, because my employer is about to release a new
>> internet based administration website for customer service staff. At the
>> moment, it looks like the GetColors function would be the easiest method
>> for gaining access, but well I still can't get it to work for me. Here is
>> my code. Any suggestions? I am using JAWS 13, with Windows 7, and IE10.
>>
>>
>> ;This first test works properly. It verified that the background color is
>> white.
>> If GetColorBackground () == RGBStringToColor ("255255255") Then
>> SayString ("white back ground")
>> Else
>> SayString ("not white")
>> EndIf
>>
>> ;This second test works properly. it verified the color of the text at
>> the
>> cursor to be red.
>> If GetColorText () == RGBStringToColor ("255000000") Then
>> SayString ("red text")
>> Else
>> SayString ("not red")
>> EndIf
>>
>> ; This next function does not work. It should find red text on a white
>> background and then place the JAWS cursor at the location of the desired
>> color.
>> FindColors (RGBStringToColor ("255000000"), RGBStringToColor
>> ("255255255"), s_top,1)
>>
>> ;This final test searches for the combination of red on white with a test
>> to verify if it was found. It always fails even if the cursor is on the
>> desired color.
>> ; I eliminated the background color from the search to simplify it.
>> if FindColors (RGBStringToColor ("255000000"), IgnoreColor, s_next, 0) ==
>> true Then
>> SayString ("found the color")
>> Else
>> SayString ("color not found")
>> JAWSCursor ()
>> SayLine () ;reads the line where the JAWS cursor was placed.
>> PCCursor ()
>> EndIf
>>
>> Thanks,
>> John
>
> __________
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
> __________
>
> View the list's information and change your settings at
> //www.freelists.org/list/jawsscripts
>
>
__________
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
__________�
View the list's information and change your settings at
//www.freelists.org/list/jawsscripts
Other related posts:
