[iyonix-support] Re: USB2 problem

On 16 Jul, John Sandford <lists@xxxxxxxxxxxxxxxxxx> wrote:
> In message <4e4743166ejohn@xxxxxxxxxxxxxxxx> John Harrison
>           <john@xxxxxxxxxxxxxxxx> wrote:

> > I download images from my camera using the supplied adaptor plugged
> > into the front USB socket on my Iyonix.  The instructions say to plug
> > and unplug from the camera while it is turned off, so after
> > downloading, I always dismount the drive, then switch off the camera,
> > then unplug.
> > 
> > I recently installed USB2, and that procedure no longer works.  The
> > camera won't switch off while connected to the computer.  If I turn
> > off the computer then it will, but that never used to be necessary.

> My olympus wont turn off either never has whilst connected, this
> applies to other OSes I use.

This one is so well known that most magazines covering the subject
recommend that you use a mains derived supply for the camera or remove the
memory card and use a card reader. If you don't you can expect a set of
flat batteries in a very short time.

-- 

Steve Pampling
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: