In message <4e4743166ejohn@xxxxxxxxxxxxxxxx> John Harrison <john@xxxxxxxxxxxxxxxx> wrote: > I download images from my camera using the supplied adaptor plugged into > the front USB socket on my Iyonix. The instructions say to plug and unplug > from the camera while it is turned off, so after downloading, I always > dismount the drive, then switch off the camera, then unplug. > > I recently installed USB2, and that procedure no longer works. The camera > won't switch off while connected to the computer. If I turn off the > computer then it will, but that never used to be necessary. My olympus wont turn off either never has whilst connected, this applies to other OSes I use. > I tried unplugging the USB lead from the Iyonix, which turned the camera > off, but gave me a real scare when it wouldn't turn on again until I took > out the battery and replaced it. unpluging the camera always results in mine turning off. > Why does USB2 behave like this? It must be doing something that the camera > interprets as an operation in progress, and therefore waits. > > I am running RO 5.11 > > John > John -- John Sandford West Herts UK Hemel Hempstead RISC OS User Group email info@xxxxxxxxx --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support