[iyonix-support] Re: Mouse not working
- From: Ian Hamilton <Ian_Hamilton@xxxxxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Thu, 13 Jul 2006 07:50:01 +0100
In article <4e4562e8e5barry@xxxxxxxxxxxxx>, Barry E Allen
<barry@xxxxxxxxxxxxx> wrote:
> Since I've had the hardware mods done on my fairly old RISC OS 5.11
> Iyonix, about once in every three startups the mouse does not work.
> Before the mods were done it never happened.
> Any thoughts?
Are the USB devices connected to the same sockets as before?
I suspect you are seeing an interaction with another USB device. Assuming
the mouse is connected directly to the Iyonix rather than a hub, try
swapping the mouse plug with whatever is in the adjacent socket. This
should move the mouse to the other bus.
If that doesn't help then you could run !USBKick in your boot sequence
(after !HID) which should resolve the problem.
HTH,
Ian
--
Ian Hamilton (RISC PC RO4) http://www.hamiltoni.pwp.blueyonder.co.uk/
(Iyonix RO5) Programs compatible with RISC OS 3/4/5
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
