[iyonix-support] Re: Mouse not working
- From: Barry E Allen <barry@xxxxxxxxxxxxx>
- To: iyonix-support@xxxxxxxxxxxxx
- Date: Thu, 13 Jul 2006 08:11:09 +0100
In article <4e45aa0801Ian_Hamilton@xxxxxxxxxxxxxxxx>, Ian Hamilton
<Ian_Hamilton@xxxxxxxxxxxxxxxx> wrote:
> In article <4e4562e8e5barry@xxxxxxxxxxxxx>, Barry E Allen
> <barry@xxxxxxxxxxxxx> wrote:
> > Since I've had the hardware mods done on my fairly old RISC OS 5.11
> > Iyonix, about once in every three startups the mouse does not work.
> > Before the mods were done it never happened.
> > Any thoughts?
> Are the USB devices connected to the same sockets as before?
> I suspect you are seeing an interaction with another USB device.
> Assuming the mouse is connected directly to the Iyonix rather than a
> hub, try swapping the mouse plug with whatever is in the adjacent
> socket. This should move the mouse to the other bus.
> If that doesn't help then you could run !USBKick in your boot
> sequence (after !HID) which should resolve the problem.
Thanks Ian, I'll try this.
--
Barry A.
Rugby Union in Manchester:- http://www.broughton-park.org.uk/
---
To alter your preferences or leave the group,
visit //www.freelists.org/list/iyonix-support
Other info via //www.freelists.org/webpage/iyonix-support
Other related posts:
