[iyonix-support] Re: Location of MDF for "Auto" Monitor type

In message <38784d964e.druck@xxxxxxxxxxxxxxxx>
          "David J. Ruck" <druck@xxxxxxxxxxxx> wrote:

> On 16 Dec 2006 Andrew Pinder <Andrew.Pinder@xxxxxxxxxxxxx> wrote:
>> I created a suitable MDF for the monitor (Eizo F55) when I bought the
>> Iyonix in 2003.  It's just that at boot up the initial screen is
>> oversize and offset to the right.  The implication of your message is
>> that there is no way round this.  It is trivial, I know, since as Boot
>> progresses my MDF takes over.  (BTW MonitorType is set to 1)
> 
> Try setting the MonitorType to 4 (VGA) and Mode to 28, as this may produce
> timing your monitor likes better. If not abort the boot sequence by pressing
> escape, then adjust your monitor to display the predesk screen correctly. It
> should then remember for next time, but not affect your desktop mode.

Thanks

Configure Mode 31 produces the desired effect.  No visible difference 
between the effect of MonitorType 4 and MonitorType 1

Regards

-- 
Andrew Pinder
---
To alter your preferences or leave the group, 
visit http://www.freelists.org/list/iyonix-support
Other info via http://www.freelists.org/webpage/iyonix-support

Other related posts: