On 24 Oct 2006 taffy@xxxxxxxxxxxxxxxxx (Elwyn Evans) wrote: > Hi All, > This is the first time I have needed Iyonix support so thank heaven I chose > to receive it on my trusty RiscPc. For a few days the Iyonix would not > connect to my network/Broadband router (Netgear DG834) on bootup but would > after a reset. Yesterday it took several attempts to get the LED on the > router to light up but the Iyonix reported "Socket not connected" at all > tries to reach the Internet, and Pinging the router or RiscPC gives "No > route to host". All of which makes me think my network card has failed. Its most likely a PSU problem that prevents the network inerface (on the motherboard, there is no card) from initialising. Phone John Ballance at Castle and discuss options. Cheers ---Dave -- ____________________________________________________________________________ David J. Ruck Phone: +44- (0)7974 108301 Email: druck@xxxxxxxxxxxx ____________________________________________________________________________ --- To alter your preferences or leave the group, visit //www.freelists.org/list/iyonix-support Other info via //www.freelists.org/webpage/iyonix-support